Bedienungsanleitung Solis 8001 (Seite 32 von 34) (Deutsch, Englisch, Französisch)

708876

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

 DONE-SIGNAL

Once the toasting process is over and the lifting mechanism has lifted the bread up,

an acoustic Done-signal sounds. The default factory setting for this signal is the loud

setting, but it can be also set to quiet or muted.

Setting the volume of the Done-signal

Hold the LIFT AND LOOK™ button pressed for 2 seconds until the following buttons

surrounds light up white: A BIT MORE™, CRUMPET/FRUIT BREAD and FROZEN.

To set the signal to mute:

Press the FROZEN button, the button surround ﬂashes three times.

To set the signal to quiet:

Press the CRUMPET/FRUIT BREAD button, the toaster quietly beeps three times.

To set the signal to loud:

Press the A BIT MORE™ button, the toaster loudly beeps three times.

 A BIT MORE™ button (E)

The extension function can be used during or after a toasting process.

Activating the extension function during the toasting process

Once you press the A BIT MORE™ button, the button surround lights up white.

The toasting time is automatically extended, however, this is not indicated by the

LED bar. This means that the length of the LED bar does not change. The extension

function can be stopped at any time by another press of the A BIT MORE™ button.

In that case, the originally selected toasting process is completed.

Activating the extension function after a toasting process

has been completed

1. The button surround lights up white as soon as you press the A BIT MORE™ but-

ton. The lowering mechanism automatically lowers the bread and the additional

toasting time starts. The LED bar illuminates up to the lowest roasting degree set-

ting 1 and the segment to the far right ﬂashes to count down the additional time.

2. The TOAST/CANCEL button surround lights up red and the surround of the

LIFT AND LOOK™ button lights up white to indicated that the degree of roasting

can be checked at any time resp. that the toasting process can be stopped with

the TOAST/CANCEL button if the desired degree of roasting has been reached.

Approximately 10 seconds before the extension time has elapsed, the button

surround of LIFT AND LOOK™ goes out and the function can no longer be

activated.

3. When the toasting process stops and while the lifting mechanism is lifting up

the bread, the button surround of TOAST/CANCEL ﬂashes red. The LED bar on

the other hand does not ﬂash, instead it lights up constantly up to the selected

roasting degree.

4. Once the toasting process has been completed and the bread has been lifted

up, the Done-signal sounds. Remove the bread, the button surround of TOAST/

CANCEL lights up white for 30 seconds to indicate that the appliance is ready for

the next toasting process.

Note:

The A BIT MORE™ function can be activated in conjunction with the TOAST/

CANCEL, CRUMPET/FRUIT BREAD and FROZEN buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 8001 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solis 8001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info