568083
3
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Alarm
Enable Alarms:
1) To enable Alarm 1, slide the ALARM SELECTOR (11) to AL1 position. the alarm indicator
AL1 (1) will light up.
2) To enable Alarm 2, slide the ALARM SELECTOR (11) to AL2 position, the alarm indicator
AL2 (12) will light up.
3) To enable both alarms, slide the ALARM SELECTOR (11) to AL1+AL2 position, the alarm
indicators AL1 (1) and AL2 (12) will light up.
To Select Wake up mode
To select the wake up mode, slide the Alarm Mode Switch (2) to your desired position:-
a) BUZZ for sound b) VIB for bed shaker c) VIB/ BUZZ for both sound and bed
shaker
NOTE: once the wake up mode is chosen, this will apply to both alarms.
Alarm Patterns
When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of sync
with the vibrator. This means that when the buzzer / flashing display is ON, the vibrator will be OFF
and while the buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 - When Alarm 1 is activate, it will have 3 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
ALARM 2 - When Alarm 2 is activate, it will have 4 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
Adjusting The Alarm Duration Time
The default alarm duration time setting is 30 minutes; you may adjust the alarm duration between 1
minute and 59 minutes as desired. To adjust the alarm duration:
• Press and hold the AL. SET button (5) for six seconds. The clock display will show the default
alarm duration as 30. Release the AL SET button (5).
Press the SLOW” button (7) to adjust the alarm duration to the desired setting, from 1 minute to
59 minutes.
When the display is showing the desired alarm duration time, it will return to the normal clock
mode after 3 seconds. The new alarm duration time setting becomes the new default and remains
in the memory until you change it again.
Snooze Operation
1. When the alarm turns on in the morning you may press the SNOOZE Button (9) to stop the
alarm temporarily. The alarm will shut off for 9 minutes or for the predetermined time you
select from 1-30 minutes, and then turn on again. The snooze operation may be repeated
indefinitely until the alarm is turned off.
2. The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sonic Alert SB200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sonic Alert SB200

Sonic Alert SB200 Bedienungsanleitung - Deutsch - 3 seiten

Sonic Alert SB200 Bedienungsanleitung - Französisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info