Bedienungsanleitung Sonos IN-WALL BY SONANCE (Seite 4 von 4) (Englisch)

700031

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

TWO (2) YEAR WARRANTY

We stand for the quality of our SONOS products. We oer a 2 year full warranty on all products sold. The details of this warranty are set out in our End

User License and Warranty Agreement (EULA). A summary of the conditions of the SONOS Warranty is set out below. In the event that there is any conﬂict

between this summary and the EULA, the EULA will control. Your local consumer protection laws may provide additional rules on warranty. The SONOS

Warranty does not in any way restrict the rights that you may have under such rules. The SONOS Warranty covers defects in materials and workmanship

in every SONOS product for two (2) years from the date of shipment from SONOS or the date of the original retail purchase from an Authorised SONOS

Dealer. The SONOS warranty does not guarantee that SONOS products will at all times operate without interruption or will be error-free, or that all errors

may be corrected. If you have a valid claim under the SONOS Warranty and have returned the product in accordance with the procedure set out below, we

will repair or replace the defective product free of cost. If we determine that the problem is not covered under the SONOS Warranty, we will notify you and

inform you of service or replacement alternatives that are available to you for an additional fee. The warranty period is not extended if we repair or replace

your product.

Your SONOS Warranty is transferable with ownership, so if you give or sell the SONOS product to someone during the guarantee period, it’s still covered.

There are some exclusions to the SONOS Warranty, including but not limited to: problems that result from external causes such as accident, abuse or

misuse;

Use that is not in accordance with SONOS’ product instructions; products with missing or altered serial numbers; products which have had their housings

opened or are otherwise tampered with; or problems caused by using third party accessories, parts, or components.

SONOS, Play:1 and all other SONOS product names and slogans are trademarks or registered trademarks of SONOS, Inc. SONOS Reg. U.S. Pat & TM O.

Use of the Works with Apple badge means that an accessory has been designed to work speciﬁcally with the technology identiﬁed in the badge and has

been certiﬁed by the developer to meet Apple performance standards.

Apple is a trademark of Apple Inc., registered in the U.S. and other countries.

Before You Begin

SONOS by Sonance In-Wall and In-Ceiling speaker grilles

completely cover the exposed speaker frame, so only the grilles

(not the speakers themselves) require painting.

IMPORTANT: IF THE WALL OR CEILING WILL BE PAINTED AFTER THE SPEAKERS ARE INSTALLED, THE

SPEAKER FLANGE AND BAFFLE MUST BE MASKED BEFORE PAINTING THE WALL OR CEILING.

Figure 8

Grille Painting Instructions Preparing The Grille For Painting

Carefully remove the scrim cloth from the underside of the grille.

The scrim cloth is held in place with a light tacking glue. Use a

heating agent such as a heat gun or hair dryer to soften the glue

and carefully remove the cloth, since you will need to replace it

when you’re done painting the grille. Be careful not to deform

the cloth’s shape while removing it - this will make it very dicult

to properly replace the cloth on the grille. Remove any adhesive

residue from the back of the grille before beginning painting

Painting The Grille

1. Prime the grille with a metal primer/bonder in a spray can.

Carefully follow the manufacturer’s directions on the can.

2. We recommend using water-based latex paint on the grilles.

Thin the paint with a proper thinning agent to a ratio of 1:1

paint-to-thinner, and strain it through a standard mesh strainer

to remove any lumps.

IMPORTANT: DUE TO ITS INCREASED DURABILITY, OIL-BASED PAINT SHOULD BE CONSIDERED FOR VP

EXTREME SERIES SPEAKERS THAT ARE INSTALLED OUTDOORS.

3. Use a small touch-up gun or cap-spray gun with a #3 tip

for painting.

(A) Set the nozzle with a medium to wide fan

(B) Set the pressure regulator to 60psi

from approximately 10 inches away

(D) Let the paint set for a minute, then turn the grille 90º

and lightly spray the grille again in 3 quick strokes.

Repeat this step until all four sides of the grille have

been evenly painted evenly.

4. While the paint is still wet, inspect the grille and make

sure that excess paint has not collected underneath the grille

frame, and that none of the grille perforations are ﬁlled with

paint. If any are, use compressed air to blow the paint out of

the perforations.

IMPORTANT: IF YOU FIND ANY GRILLE PERFORATIONS THAT ARE PLUGGED WITH PAINT AFTER THE PAINT

HAS DRIED, USE A STRAIGHT PIN OR SEWING NEEDLE TO CAREFULLY REMOVE THE PAINT.

5. Once the paint has thoroughly dried, replace the scrim cloth

on the back of the grille and mount the grille on the speaker.

07.11.19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sonos IN-WALL BY SONANCE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info