Bedienungsanleitung Sony cdx-s2050 (Seite 7 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

163451

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

CDX-S2050V/S2050C/S2050

2-348-403-21 (1)

H:\Data Disk\2348403211\234840321CDXS2050VEUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2348403211\234840321CDXS2050VEUR\01GB02CD-EUR.fm masterpage:Right

Radio

Storing and receiving

stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold (BTM) until “BTM”

flashes.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previous stored station will be replaced.

Tip

When an RDS station is stored, the AF/TA setting is

also stored (

page 8).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

With the card remote commander

To select preset stations, press M or m.

Tuning automatically

1 Select the band, then press (SEEK) +/–

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK)

+/– to locate the

approximate frequency, then press (SEEK)

+/–

repeatedly to fine adjust to the desired frequency

(manual tuning).

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio programme signal.

Display items

A Radio band, Function

B Frequency*

(Station name), Clock,

RDS data

C TA/TP*

*1 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

*2 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

To change display items B, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

AF (Alternative

Frequencies)

Selects and retunes the

station with the strongest

signal in a network. By

using this function, you can

continuously listen to the

same programme during a

long-distance drive without

having to retune the same

station manually.

TA (Traffic

Announcement)/

TP (Traffic

Programme)

Provides current traffic

information/programmes.

Any information/

programme received, will

interrupt the currently

selected source.

PTY (Programme

Types)

Displays the currently

received programme type.

Also searches your selected

programme type.

CT (Clock Time) The CT data from the RDS

transmission sets the clock.

continue to next page t

ABC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cdx-s2050 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info