Bedienungsanleitung Sony cmt ep 305 (Seite 18 von 20) (Englisch)

158410

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

On operation

• If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lens inside the CD

player. Should this occur, the system will not

operate properly. Remove the CD and leave the

system turned on for about an hour until the

moisture evaporates.

• When you move the system, take out any discs.

If you have any questions or problems concerning

your stereo system, please consult your nearest Sony

dealer.

Notes on CDs

• Before playing, clean the CD with a cleaning cloth.

Wipe the CD from the center out.

• Do not use solvents.

• Do not expose the CD to direct sunlight or heat

sources.

• Discs with non-standard shapes (e.g., heart, square,

star) cannot be played on this system. Attempting to

do so may damage the system. Do not use such

discs.

Note on CD-R/CD-RW playback

Discs recorded on CD-R/CD-RW drives may not be

played back because of scratches, dirt., recording

condition or the drive’s characteristics. Besides, the

discs, which are not yet finalized at the end of

recording cannot be played back.

Cleaning the cabinet

Use a soft cloth slightly moistened with mild

detergent solution.

Additional information

Precautions

On operating voltage

Before operating the system, check that the operating

voltage of your system is identical with the voltage of

your local power supply.

On safety

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall

outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

is not to be used for an extended period of time. To

disconnect the cord (mains lead), pull it out by the

plug. Never pull the cord itself.

• Should any solid object or liquid fall into the

component, unplug the stereo system and have the

component checked by qualified personnel before

operating it any further.

• The AC power cord must be changed only at a

qualified service shop.

• The nameplate is located on the bottom exteror.

On placement

• Place the unit in a location with adequate

ventilation to prevent heat build-up the unit.

• Do not place the unit in an inclined position.

• Do not place the unit in locations where it is;

— Extremely hot or cold

— Dusty or dirty

— Very humid

— Vibrating

— Subject to direct sunlight.

• Use caution when placing the unit or speakers on

surfaces that have been specially treated (with wax,

oil, polish, etc.) as staining or discoloration of the

surface may result.

On heat buildup

• Although the unit heats up during operation, this is

not malfunction.

• Place the unit in a location with adequate

ventilation to prevent heat build-up in the unit.

If you continuously use this unit at a large volume,

the cabinet temperature of the top, side and bottom

rises considerably. To avoid burning yourself, do not

touch the cabinet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt ep 305 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt ep 305

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info