Help Guide
Digital Still Camera
DSC-RX0M2
Warning messages
Set Area/Date/Time.
Set the area, date and time. If you have not used the product for a long time, charge the internal rechargeable
backup battery.
Unable to use memory card. Format?
The memory card was formatted on a computer and the file format was modified. Select [Enter], and then format the
memory card. You can use the memory card again, however, all previous data in the memory card is erased. It may
take some time to complete the format. If the message still appears, change the memory card.
Memory Card Error
An incompatible memory card is inserted.
Formatting has failed. Format the memory card again.
Unable to read memory card. Reinsert memory card.
An incompatible memory card is inserted.
The memory card is damaged.
The terminal section of the memory card is dirty.
The memory card is not inserted in the appropriate direction. Check the direction of the memory card.
Cannot open the shutter since the memory card is not inserted.
No memory card has been inserted.
To release the shutter without inserting a memory card into the camera, set [Release w/o Card] to [Enable]. In this
case, images will not be saved.
This memory card may not be capable of recording and playing normally.
An incompatible memory card is inserted.
Processing...
When performing noise reduction, the reduction process takes place. You cannot do any further shooting during this
reduction process.
Unable to display.
Images recorded with other products or images modified with a computer may not be displayed.
Processing on the computer such as deletion of the image files may cause inconsistencies in the image database
files. Repair the image database files.
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the power off. Cool the product
and wait until the product is ready to shoot again.
