562118
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
ENGLISH
ENG 4
PLAYBACK
1. Plug or slot in USB / SD card device to the port.
2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
3. It will read and automatic playing USB / SD card, if no disc on disc tray.
4. It will read and automatic playing DISC, if have disc on disc tray.
5. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB / SD mode.
6. Press and hold the “STOP” button for a few seconds to change play USB or SD card.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to CD / MP3
OPERATION.
RECORD OPERATION
ENCODING SINGLE SONG FROM CD / MP3 DISC TO USB / SD CARD DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed and will auto play if disc is inside.
5. Press the “STOP” button to stop the auto playback.
6. Press the “BIT RATE” button and press the “SKIP +” or “SKIP -” button to choose the desired bit
rate. Press the “BIT RATE” button again to confirm. (*CD only)
7. Press the “PLAY” button to play track.
8. Plug or slot in USB / SD card device to the port.
9. Press the “REC” button, the display will show “REC” and “USB / CARD”, “USB” is flash.
10.Press the “SKIP +” or “SKIP -” button to choose the desired media.
11.Press the “REC” button again, the appliance will start recording from the beginning to the end of the
song.
ENCODING ALL SONG FROM CD / MP3 DISC TO USB / SD CARD DEVIC
Please repeat step 1 until 6 above named Encoding single song.
7. Plug or slot in USB / SD card device to the port.
8. Press the “REC” button, the display will show “REC” and “USB / CARD”, “USB” is flash.
9. Press the “SKIP +” or “SKIP -” button to choose the desired media.
10.Press the “REC” button again, the appliance will start recording from the beginning to the
end of the CD / MP3.
ENCODING FROM TAPE TO USB / SD CARD DEVICE
1. Set the “FUNCTION” selector to “TAPE” mode. TAPE be playing.
2. Plug or slot in USB / SD card device to the port.
3. Press the “BIT RATE” button and press the “SKIP +” or “SKIP -” button to choose the desired
bit rate. Press the “BIT RATE” button again to confirm.
4. Press the “REC” button twice, the display will show “REC” and flash. Appliance will start
recording. Press the “STOP” button to complete.
ENCODING SINGLE SONG FROM USB TO SD CARD DEVICE AND
ENCODING FROM SD CARD TO USB DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the “USB / SD” button on the remote control to choose the desired media to play.
4. Press the “REC” button, the appliance will start recording from the beginning to the end of the song.
ENCODING ALL SONG FROM USB TO SD CARD DEVICE AND
ENCODING FROM SD CARD TO USB DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the “USB / SD” button on the remote control to choose the desired media.
4. Press the “STOP” button to stop the auto playback.
5. Press the “REC” button, the appliance will start recording from the beginning to the end of all
song.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

soundmaster-mcd-7400usb

Suche zurücksetzen

  • wo ist bei diesem gerät der ein und aus schalter ? Eingereicht am 3-12-2017 10:43

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Soundmaster MCD 7400USB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Soundmaster MCD 7400USB

Soundmaster MCD 7400USB Bedienungsanleitung - Deutsch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info