Bedienungsanleitung Soundmaster MCD5500 (Seite 10 von 11) (Englisch)

642508

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

MCD5500 / English Instruction Manual

Listing to tape

General operation

Stop / eject key press to stop all deck operation. Press again to open the cassette door.

Fast forward key & press to start rapid tape winding in either forward or revers

Fast rewind key direction. Press stop / fast rewind key eject keys when the cassette spools stop turning.

Play key press to start playing tape.

Pause key press to stop tape operation temporarily. Press again to resume play.

Playback

 Select “tape” function (10).

 Put in the cassette tape.

 Press play key to active playback

 Adjust the volume control (14/24) to the desire level.

 Use pause key when you want to stop playback temporarily.

 Press stop / eject key when finished.

Remark:

It is possible to play both cassette players one after the other. If you press the button “pause” and “play” at deck 1 and button

“play” at deck 2, than the tape of deck 1 will be start to play automatically after the tape of deck 2 is finished.

More features

A. Sleep function (on remote control only)

1. Press “ Sleep ” button on remote control “SLP-120 “ will shown on the LCD display (6).

2. Keep pressing the button to adjust the sleep timer in the order of 120>90> 60 > 45 >….15 minutes respectively and sleep

icon “z” will indicate on LCD.

3. System will stop and go to standby mode automatically after running the selected time.

4. To cancel the sleep mode, press “ Sleep ” button until “SLP-off’ displayed and the “ z “ indicator disappear on LCD display.

B. Timer clock setting (on remote control only)

This function allows the system to turn on automatically and wake you up by CD, DAB, FM Radio, USB/SD mode respectively.

First, set the unit at standby mode and then press & hold the “ Timer ” button on the remote control to enter the setting mode, the

LCD display will show “SET TIMER” then change to “ SELECT SOURCE and timer ” “ icon will flash on display :-

1) Wake up source press the “ Function “ button repeatedly to select the source from “ CD “ -- “ FM “ -- “DAB ”-- “ USB ” –

“SD”. Press “ Timer “ button to confirm the selected source.

2) Wake up volume press the Skip up / down “ button to adjust the wake up volume level then press “Timer” button

to confirm the wake up level.

3) Wake up time press Skip up / down “ button to set the hour & then press “Timer “ button to enter the hours.

Press Skip up / down “ button to set minutes and press “ Timer “ button “ to store the memory.

Remark

 If there is no music source being detected (such as USB/CD) when the preset time is reached, system will default to FM

mode automatically.

 For FM or DAB radio wake up, the system will preset at the latest radio frequency being listened before switching off.

 Please switch off the system manually during alarm wake up mode as the system will not turn off automatically after alarm on

mode.

 Active/de-active timer function

1. To active the timer, press once the “ Timer ” button on remote handset until the timer indicator “ ” is shown on LCD

display (2).

2. To cancel timer function by press once again “ Timer ” button until the timer indicator “ ” disappear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster MCD5500 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster MCD5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info