Bedienungsanleitung Soundmaster URD480WE (Seite 7 von 9) (Englisch)

733841

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

URD480 / English Instruction Manual

AUX-IN MODE

This unit provides an auxiliary audio signal input jack for connecting external audio devices.

Use an audio cable (not included) with one 3.5mm stereo plug on each end of the cable.

1. Plug one end into the “AUX-IN” jack (19) on the main unit and the other end of the cable into

the Line-Out jack or headphone jack of your external audio device.

2. Turn the unit on by pressing the “I / “ button (2) and choose the AUX mode by pressing the

“FUNCTION” button (8).

3. The volume level can now be controlled through the main unit. Operate all other functions on

the auxiliary device as usual.

 If the Line Out jack of your external device is connected, then you only need to adjust the

volume control of this system. If the headphone jack of your external device is connected,

then you may need to adjust both the volume control of your external device and the volume

control of this system to find the most desirable volume setting.

ALARM

Setting the Alarm

1. Set the unit in standby-mode and press the “ALARM” button (4) once.

2. The display will show “Select Alarm (1) 2”. Press the “ / ” button (10) to select alarm

setting of alarm 1 or 2.. To confirm press the “ALARM” button (4) again.

3. The display will show “Set Alarm (ON) OFF”. Press the “ / ” button (10) to select “ON”.

Press the “ALARM” button (4) again to confirm.

4. The hour digit of alarm time will flash. Press the “ / ” button (10) to select the alarm time

hour. Press “ALARM” button (4).

5. The minute digit of alarm time will flash. Press the “ / ” button (10) to select the alarm

time minute. Press the “ALARM” button (4).

6. Alarm type will be shown on display. Press the “ / ” button (10) to select alarm mode by

Buzzer / CD / USB / DAB / FM. Press the “ALARM” button (4).

7. Volume level will be shown. Press the “ / ” button (10) to adjust the wake up level.

Press “ALARM” button (4).

8. The display will show “AL1” or “AL2” icon and keep in standby-mode

9. To turn off the alarm press the “ALARM” button (4) once. Then select alarm 1 or 2 and press

the “ALARM” button (4) again. Then select OFF at “Set Alarm ON (OFF)” and press the

“ALARM” button (4) again. Then press the “ALARM” button (4) until the end of the alarm

setting. The AL will disappear on the display.

Snooze

Press the “SNOOZE” button (6) once to extend the alarm for 9 minutes every time and the AL

icon on the display will be flashing.

Setting Sleep-Timer

1. Press the “SLEEP” button (5) to enable the sleep function.

2. Keep pressing the button to adjust the sleep timer in the sequence:

10 / 20 / 30 / … / 90 minutes.

3. The system will stop and automatically go into standby-mode after the selected time has

passed.

4. To cancel the Sleep-Timer press the “SLEEP” button (5) until it reaches the “00” mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster URD480WE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster URD480WE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info