6
- Set the PROJECTION ON/OFF switch to turn on the projector.
- Focus setting : To adjust the projection clock definition turn the focus until the time is
clearly shown on the ceiling or wall.
- To preset the HOURS, press simultaneously the HOUR BUTTON and the TIME
BUTTON. Keep them depressed until the hour digits to be preset are displayed.
- To preset the MINUTES, press simultaneously the MINUTE BUTTON and the TIME
BUTTON. Keep them depressed until the minute digits to be preset are displayed.
NOTE :
- PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUM PROJECTION DISTANCE 3-9 FEET.
- TURN THE FOCUS BACK BEFORE CLOSING THE PROJECTOR.
WORKING WITH AUDIO SOURCE
1. Use connective wire to join the audio source and the main unit together.
2. Set the AM/FM/CD/BUZZ switch to the AM or FM position.
3. Adjust volume of the audio source in order to get a better amplifying effect.
REMARK :
DO NOT turn the audio source to too high volume to avoid overloading. The output sound of
the main unit will be eliminated and replaced once the ‘AUDIO IN’ JACK has connected to
other audio source. The sound will resume once the connective wire is removed from the jack.
If ‘audio in’ function is in use and broadcasting music, the alarm sound will insert into the music
at the pre-set wake up time. To stop the sound, simply press the ALARM OFF BUTTON or put
the POWER SWITCH in the ‘OFF’ position.
CARE AND MAINTENANCE
Handle your compact discs with care and they will last a long time.
- Use a soft, clean cloth moistened with plain luke warm water to clean the exterior of
the unit.
- Never use solvents such as benzene or other strong chemical cleaners since these
could damage the unit’s finish.
- Make sure that no liquid reaches the inside of the unit.
COMPACT DISCS
- Remove the CD from the case by holding it at the edges while pressing the center
hole lightly.
- Do not touch the shiny surface of the CD or bend the CD.
- Place the CD onto the spindle with the label facing up.
- A dirty CD may not play correctly. If a CD becomes dirty, wipe it with a soft cloth in a
straight line from center to edge.
CAUTION
Do not use any solvent (e.g. : record sprays, thinner, benzene, etc.) to clean a CD.
- Put the CD back in its case after use to prevent warping.
- Be careful not to scratch the surface of the CD when placing it back in the case.
- Avoid exposure to direct sunlight, temperature extremes, and moisture.
Dripping warning : The product shall not be exposed to dripping or splashing and objects
filled with liquid, such as vases, should not be placed on the product.
Ventilation warning : The normal ventilation of the product shall not be impeded.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Do not place the product in closed bookcases or racks without proper ventilation.
