Bedienungsanleitung Soundmaster WE320 (Seite 6 von 6) (Englisch)

562038

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

WE320 manual of English

2.18 Memory review

 When the radio is ON, press <Memory Scan> once to scan memory stations.

 The scanning starts from the next memory station or MEM-1 if no memory station is being selected.

 Scanning will stop at each station for 5 seconds.

2.19 Setting Bass

 When the radio on, press <Bass> once in bass display mode.

 Press <Bass> again to shut off this function and volume recover normal.

2.20 Search Up/Down

 When the radio is ON, press <Up> once to change the receiving frequency up by 1 step

 Press <Down> once to change the receiving frequency down by 1 step.

 Press and hold <Up> to search the next radio station by moving the receiving frequency up.

 Press and hold <Down> to search the next radio station by moving the receiving frequency down.

2.21 AMS Using

 Press <MEM> once to memory mode.

 Press and hold <Memory Scan> 2 seconds to active AMS mode. In this mode, the radio will automatically

store the station that had been scanned.

2.22 Display Mode

 With the system stays in clock display mode and the radio is OFF, press <Fine> once, the time section and

day-flag are all cleared with the current mode of display is shown by the icon’, “CITY” ‘DATE’, and

‘CIT’ ,” DAT”

Mode of display LCD

Clock only ‘CLOCK’ goes solid only

Clock + World Time ‘CLOCK’ + ‘CITY’ go solid

Clock + Date ‘CLOCK’ + ‘DATE’ go solid

Clock + Date + World Time ‘CLOCK’ +‘DATE’ + ‘CITY’ go solid

 Press <Fine> to go through the cycle of selection. If 'Date' and/or 'World Time' is selected, it/they will be

shown alternatively with the clock in the LCD when the radio is OFF.

 When the radio is ON and the system stays in frequency display mode, only the frequency of the station

being received will be displayed no matter what has been selected by in display mode.

2.23 Electronic Volume Control

 Only when radio is on,

 Press < Volume +> once, to increase speaker volume by one step. Hold for continually.

 Press < Volume – > once, to decrease speaker volume by one step. Hold for continually.

2.24 Key-lock

 Press and hold the <MEM.> for 3 seconds, key-lock has been switched ON, the “KEYLOCK” goes solid,

2.25 LCD Backlight

 Press any key to activate the LCD Backlight for 10 seconds.

When’ key-lock’ is active, only ‘Snooze’ have function.

2.26 Antenna

 Maximum length and rotate it to a best position. For MW and LW band, an internal Ferrite-bar Antenna is

used, so you may turn the unit to different direction in order to have a better receiving result.

2.27 Stand

 You may foldout Stand from the backside of the unit to an appropriate position, so that this unit can be

placed firmly on the table

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster WE320 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster WE320

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info