These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www
All rights including translation reserved. Reproduction by any method, e.g. photocopyfi
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V 07/13
TV wall holder 65-105 cm
(26-42”) 35 kg
Item no. 52 75 02
the safety instructions in the corresponding instructions.
lation.
Please observe the images on the attached sheet of these operating instructions.
Preparation of the TV set
•
instructions for your TV set.
• fl
display
• Remove the present base. Depending on the TV set, this base is either screwed tightly or clipped on.
Image 2
• Remove the two plastic covers (5) from the holder
•
level and the screw of the shaft must point upwards.
• Adjust the wall holder laterally using the integrated water level.
•
•
•
•
Image 3
Depending on the position of the attachment points on the TV’s back, there are dif
VESA up to 200x200
•
VESA up to 400x400
•
•
Make absolutely certain the mounting plate is installed in the centre of the TV set.
Image 4
•
in the fi rst or second image.
• During the installation, keep in mind that the strap of the mounting plate must face towards the TV’s upper side.
When fi
only must these be of the correct thread type for the TV set, but they must also not be too long;
otherwise they will damage the TV set.
The screws must be screwed into the threaded fi xture holes on the TV set with at least 5 full 360°
turns.
please acquire suitable screws at your local hardware store.
contact the TV manufacturer or an appropriate specialist.
•
ranty/guarantee!
Image 5
• Lift the TV set with the mounting plate and place it onto the wall holder from the top, as shown in the fi rst image.
• The strap of the mounting plate must be inserted neatly into its counterpart on the wall holder
• Secure the mounting plate on the wall holder using the two safety screws (M).
•
be able to use it like a ratchet.
Maintenance and Care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry cloth, requires no
maintenance whatsoever
Never use aggressive cleaning agents or chemical solutions as these may damage the surface of the case.
T
TV size 65-105 cm (26-42”)
Load capacity
VESAfi xture .......................... max. 400 x 400
Wall distance 65-480 mm
Material .................................. Steel/Aluminium
╞
OPERA INSTRUCTIONS
Intended use
The TV wall holder is used for the mounting of suitable TV sets on walls.
The TV set may not exceed the values for TV size and weight specifi
Any use other than that described above will lead to the damage of this product or of the TV set. Furthermore, this
involves risks such as damage to furniture in close proximity to the wall holder
No part of the product may be modifi ed or altered.
The safety instructions must be observed at all times.
Package content
See image 1 on the attached sheet of these operating instructions.
Safety Instructions
instructions. We do not assume any liability for any resulting damage.
ling or non-compliance with the safety instructions. In such cases, the warranty will be null and
void.
instructions.
The arrow symbol indicates tips and notes
• A
•
• Selecting an unsuitable installation location can lead to personal or material damage.
•
of injury!
•
any conversion or repair work.
•
on the back of your TV set.
•
help with the installation. This person can hold the TV set still, for example, while you are attaching the
wall holder
•
fall, this could cause expensive damage to the equipment and there is the potential danger of personal injury!
•
• fi ttings from time to time. Adjusting the position of the TV set and/or the wall holder and moving
them can sometimes cause the screws to become loose over time.
•
• When moving/adjusting, do not press on the TV set’s screen.
•
set weight and/or its size.
• Do not use the TV wall holder to support yourself or to hold onto.
• fi x any objects to the
• In case of doubt, do not perform the installation yourself. Have an expert carry out the installation.
Installation
Wall-mounting is permissible only where the wall concerned is of the correct type and condition.
Lightweight partition walls or those made from gypsum boards are normally unsuitable. However
specialist retailers do sometimes stock special dowel fi ttings for such installation locations. If
you are in doubt, ask a specialist before installation.
(screws, dowels, etc.). The dowel screws enclosed are only suitable for solid walls. Special dow-
els and screws are not normally supplied with the TV wall holder and they must be bought sepa-
rately
screws are fi xed securely
fi
situated at the correct location (height and position) when you have fi
aged. Inadvertently drilling through electric cables causes the life-threatening danger of an elec-
tric shock!
