Bedienungsanleitung SR SUNTOUR Fork (Seite 3 von 16) (Englisch)

805966

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

BEFORE EVERY RIDE

Avoid serious personal injury or even death. Do not ride the bicycle if any of the following

criteria is not met! Correct any condition before you ride.

WARNING !

ØInspect your bicycle and suspension system including

the handlebars, pedals, crank arms, seat post, saddle,

etc. for any cracks, dents, bent or tarnished parts. Also

search for any oil leaking out of your shocks. Be sure to

check hidden areas on the underside of your bike. If any

condition exists, consult a trained and qualified bicycle

mechanic to determine the cause and make any

necessary correction.

ØCompress your suspension system with your body

weight. If it feels too soft, make the necessary

adjustments until you have reached the correct SAG

value. Please also see the instruction in this manual

regarding SAG.

ØMake sure your brakes are properly installed/adjusted

and work correctly.

ØSpin the wheels. Make sure that wheels are perfectly

centered and do not contact the suspension fork or

brakes.

ØIf you are using a quick release system to fasten your

wheel set, make sure that all levers and nuts are

properly tightened. In case you are using a through axle

system, make sure that all fixing bolts are tightened with

the appropriate torque values. Strictly follow the

instructions provided by the manufacturer of the quick

release or through axle system.

ØCheck the cable length and routing of your components.

Make sure they do not interfere with your steering of

the bicycle.

ØIf you are using reflectors for on-road cycling, make sure

they are clean and properly installed.

ØCheck mounting hardware of all components to make

sure everything is tightened.

ØBounce your bike on the ground while looking and

listening for anything which might be loose.

FORK ASSEMBLY

Avoid product malfunction, an accident, personal injury or death. Your new SR SUNTOUR

suspension fork should be installed, maintained and serviced by a qualified and trained bicycle

mechanic. Avoid product failure and an accident, personal injury or death. All mounting screws

must be tightened with the respective torques specified by the manufacturer of each individual

component (i.e., brake, headset, etc.).

WARNING !

1. Remove the old fork from your bicycle. Remove the headset crown race from the fork.

2. Measure the length of the steerer tube of your old fork and compare it to the length of the steerer tube of the SR

SUNTOUR fork. The standard length of SR SUNTOUR suspension fork steerer tube is 255mm. It may be necessary

to shorten the steerer tube to the correct length.

3. Install the fork crown race firmly at the top of your fork crown. Reattach the fork assembly (headset, spacer,

handlebar stem) to the bicycle. Adjust the headset until no more play is observed. Further information can be

found in the installation instructions of the headset manufacturer.

You can use the following formula to determine the proper length of the steerer tube: Head tube of the frame

+ Headset height + Spacer if applicable + Height of the stem -3 mm distance = Length of the steerer tube

4. Install and properly adjust the brakes according to the brake manufacturer’s instructions. If you are using a disc

brake, install the brake only into the designated threaded receptacle hole for the disc brake. Use only cantilever

brakes that are made for use without reinforcing brace. Follow the assembly instructions of your brake

manufacturer. Select the proper length for the brake cable so that it does not interfere with the fork or steering.

5. Reattach the front wheel. Make sure that all clamping levers and nuts are set and tightened properly (at least

four threads must engage in the adjusting nut when the quick release is locked). If the fork is equipped with a

thru-axle system, then all screws must be checked for proper torque. Follow the instructions of the Quick

Release or Turn-Axle manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SR SUNTOUR Fork Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SR SUNTOUR Fork

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info