Bedienungsanleitung Stanley FME670 (Seite 4 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

622172

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

(Original instructions)

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety instructions for heat

guns.

Warning: Do not use outdoors, indoor use only.

Warning: This appliance must be placed on its stand when

not in use.

Warning: A re may result if the appliance is not used with

care, therefore be careful when using the appliance in places

where there are combustible materials.

u Do not apply heat to the same place for a long time.

u Do not use in presence of an explosive atmosphere.

u Be aware that heat may be conducted to combustible

materials that are out of sight.

u Place the appliance on its stand after use and allow it to

cool down before storage.

u Do not leave the appliance unattended when it is switched

on.

u Do not obstruct either the air intake slots or the nozzle

outlet as this may cause excessive heat build up resulting

in damage to the appliance.

u Do not direct the hot air ow at other people or animals.

u Do not touch the nozzle as it becomes very hot during use

and remains hot for up to 30 minutes after use.

u Do not place the nozzle against any object during or im-

mediately after use.

u Do not poke anything down the nozzle as it could give you

an electric shock.

u Do not look down the nozzle while the appliance is

switched on.

u Do not use the appliance as a hair dryer! The air tempera-

ture is far higher than a hardware.

u Ensure adequate ventilation during use as toxic fumes

may be produced.

u Do not use the appliance in a damp atmosphere.

u When stripping paint, ensure that the work area is

enclosed. Wear a dust mask specically designed for

protection against lead paint dust and fumes and ensure

that persons within or entering the work area are also

protected.

u Do not burn paint, as it could cause a re hazard.

u Do not allow paint to adhere to the nozzle as it could ignite

after some time.

u Switch off the appliance and allow it to cool before tting

any accessory.

Stripping lead-based paint

u Extreme care should be taken when stripping paint. The

peelings, residue and vapours of paint may contain lead,

which is poisonous. Any pre-1960 building may in the

past have been painted with paint containing lead. This

paint may be covered with additional layers of paint. Once

deposited on surfaces, hand to mouth contact can result in

the ingestion of lead.

u Exposures to even low levels of lead can cause irrevers-

ible brain and nervous system damage. The greatest

danger of lead poisoning is to children and pregnant

women.

u Before starting work, it is important to determine whether

the paint to be stripped contains lead. This can be done

using a test kit or by a professional decorator. Do not

smoke, eat or drink in a work area that could or may be

contaminated by lead. Lead based paints should only be

removed by a professional and should not be removed

using a heat gun.

Safety of others

u This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their

safety.

u Children should be supervised to ensure that they do not

play with the appliance.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME670 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info