Bedienungsanleitung Stanley SFMCPH845 (Seite 7 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720496

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

ENGLISH

b ) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must berepaired.

c ) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the

risk of starting the power toolaccidentally.

d ) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrainedusers.

e ) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained powertools.

f ) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier tocontrol.

g ) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardoussituation.

h ) Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations

5) Battery tool use and care

a ) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another batterypack.

b ) Use power tools only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury andfire.

c ) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or afire.

d ) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation orburns.

e ) Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk

ofinjury.

f ) Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130 ° C may cause explosion.

g ) Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified range

may damage the battery and increase the risk offire.

6) Service

a ) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool ismaintained.

b ) Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers

Additional Safety Instructions for Hedge

Trimmers



WARNING: Cutting elements continue to rotate after the

motor is switchedoff.

• Keep all parts of the body away from the blade. Do not

remove cut material or hold material to be cut when

blades are moving. Blades continue to move after the switch

is turned off. A moment of inattention while operating the

hedge trimmer may result in serious personalinjury.

• Carry the hedge trimmer by the handle with the blade

stopped and taking care not to operate any power

switch. Proper carrying of the hedge trimmer will decrease the

risk of inadvertent starting and resultant personal injury from

theblades.

• When transporting or storing the hedge trimmer, always

fit the blade cover. Proper handling of the hedge trimmer

will decrease the risk of personal injury from theblades.

• When clearing jammed material or servicing the unit,

make sure all power switches are off and the battery

pack is removed or disconnected. Unexpected actuation

of the hedge trimmer while clearing jammed material or

servicing may result in serious personalinjury.

• Hold the hedge trimmer by insulated gripping surfaces

only, because the blade may contact hidden wiring.

Blades contacting a "live" wire may make exposed metal parts

of the hedge trimmer "live" and could give the operator an

electricshock.

• Keep all power cords and cables away from cutting area.

Power cords or cables may be hidden in hedges or bushes and

can be accidentally cut by theblade.

• Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of lightning.

This decreases the risk of being struck bylightning.

• To reduce the risk of electrocution, never use the

extended-reach hedge trimmer near any electrical

power lines. Contact with or use near power lines may cause

serious injury or electric shock resulting indeath.

Stanley SFMCPH845 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info