Bedienungsanleitung Stanley STEL401 (Seite 12 von 14) (Englisch, Portugiesisch, Spanisch)

805835

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

12 • ENGLISH

c. Disconnect the plug from the power source and/or

the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power

tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts and

any other condition that may affect the power

tools operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

5. Service

a. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

6. Electrical safety

Your tool is double insulated; therefore no earth

wire is required. Always check that the main

voltage corresponds to the voltage on the rating

plate.

Warning! If the power cord is damaged, it must

be replaced by the manufacturer, authorized

STANLEY Service Center or an equally

qualified person in order to avoid damage or

injury. If the power cord is replaced by an equally

qualified person, but not authorized by

STANLEY, the warranty will not be valid.

7. Labels on tool

The label on your tool may include the following

symbols:

FEATURES (FIG. A)

1. On/off switch

2. Dustbag

3. Dust extraction outlet

4. Sanding base

5. Paper clamp lever

INTENDED USE

Your Stanley sander has been designed for sanding wood,

metal, plastics and painted surfaces.

ADDITIONAL POWER TOOL

SAFETY WARNINGS

fHold the power tool by insulated gripping

surfaces, because the sanding belt / sanding base

may contact its own cord. Cutting a “live” wire may

make exposed metal parts of the power tool “live” and

shock the operator.

fUse clamps or another practical way to secure

and support the work piece to a stable platform.

Holding the work by hand or against your body leaves

it unstable and may lead to loss of control.

f Warning! Contact with or inhalation of dust arising

from sanding applications may endanger the health of

the operator and possible bystanders. Wear a

dust mask specifically designed for protection against

dust and fumes and ensure that persons within or

entering the work area are also protected.

fThoroughly remove all dust after sanding.

fTake special care when sanding paint which is

possibly lead based or when sanding some woods

and metal which may produce toxic dust:

- Do not let children or pregnant women enter the

work area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris

safely.

fThis tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with the

appliance.

fThe intended use is described in this instruction

manual. The use of any accessory or attachment

or performance of any operation with this tool other

than those recommended in this instruction manual

may present a risk of personal injury and/or damage

to property.

Read

Instructions

Manual

Use Eye

Protection

Use Ear

Protection

V ........ Volts

A ........ Amperes

Hz ....... Hertz

W ........ Watts

min ..... minutes

..... Alternating

Current

..... Direct

Current

n0 ....... No-Load

Speed

...... Class II

Construction

.... Earthing

Terminal

.... Safety Alert

Symbol

.../min.. Revolutions

or Recipro-

cation per

minute

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley STEL401 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info