48123
102
Zoom out
Zoom in
Vorherige Seite
1/107
Nächste Seite
94
Appendix F: Glossary
adjustment lever Controls the darkness of the printing by adjusting for the thickness
of the paper you are printing on.
Centronics cable Parallel cable normally used to connect the printer to the computer.
control code A numeric code that instructs the printer to perform an operation.
For example, the computer sends the printer a form feed control
code (12) to tell it to eject the current page.
Electronic DIP
Switch settings
Printer settings that take effect when you switch on the printer.
You can change these settings using the control panel.
emulation Ability of one printer to act like (emulate) another type of printer.
hexadecimal
dump
Printout of all character codes and control codes as they are
received by the printer, along with their hexadecimal values.
multi-part forms Forms that consist of more than one sheet. This printer can print on
forms that have up to seven sheets.
NLQ fon Near letter-quality font.
off-line Printer mode in which the printer will not accept data or continue
printing.
on-line Printer mode in which the printer is ready to print.
paper parking Moving fanfold paper into a position that allows printing of cut-
sheets without removing the fanfold paper from the printer.
print head The component of the printer that transfers the image to the paper.
Quiet mode Mode that reduces printing noise. Also reduces printing speed.
release lever Releases the paper. This lever must be in the cut-sheet position for
cut-sheet paper and in the fanfold position for fanfold paper.
serial-to-parallel
interface converter
Option that makes it possible to connect the printer to a computer
via a serial interface instead of the standard Centronics parallel
interface.
tear-off function Function that moves fanfold paper to a position where it can be
torn off.
tractors Mechanisms that control the movement of fanfold paper.
102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Star LC-90 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info