Bedienungsanleitung Steba LB6 (Seite 8 von 20) (Deutsch, Englisch, Holländisch, Französisch)

488028

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

FUNCTIONS

Ultrasonic atomization technology with either cool or warm mist. (The temperature ∙

of warm mist is between 40°C to 50°C)

Water softening function: To soften hardness of water in order to prolong the ∙

useful life of the product.

Water tank with an expandable handle that is convenient to use. ∙

There are three different modes for mist control. ∙

Highhumidifyingcapacity:■300ml/h; ∙

Middlehumidifyingcapacity:■200ml/h; ∙

Lowhumidifyingcapacity:■100ml/h. ∙

Integrated with two rotating nozzle that allows users to adjust the direction of the ∙

mist.

The tank is in blue and with lighting effects. The tank would alight once the humi- ∙

difier has been turned on and would sparkle when there is lack of water.

Humidity display: show the indoor humidity in the area. ∙

Automatic humidity control: User can set the humidity in the room according to ∙

their will (from 30% RH – 70%RH). When the indoor temperature reaches the set-

ting, there will be an automatic cut-off.

Emitting mist continuously: The humidifier could be established for emitting mist ∙

continuously while neglecting the humidity in the area.

Timer: Automatic shut down function, user can set the timer before they go to ∙

sleep or before leaving the area. (Available from 1 hour to 12 hours)

Shut down protection when water-short: The unit will alarm if there is a lack of ∙

water. This helps to prevent danger due to the lack of water and protect the humi-

difier.

Touch sensor: Control panel is made of a top grade capacitance sensor touch switch. ∙

An outlet at the bottom of the humidifier, for easy cleaning and the disposal of ∙

water remaining in the gutter.

HOW TO USE

Preparation before turning on the humidifier:

Preparation for the filter

1. Take the tank out, and then the filter.

2. For the first time of use, rinsed the filter until the dependencies on the surfaces of

the yellow particles are gone.

Note: This filter is an additional item. The operation of the humidifier would not be

affected without it.

Adding water to the tank

1. Put the humidifier on a horizontal surface. Take the tank out from the humidifier.

Note: Do not add water to the GUTTER directly.

2. Turn the tank upside down. Unscrew the cover anti-clockwise. Fill the tank with

clean tap water or distilled water within 5°C to 40°C until water reaches the stated

line.

3. Screw the cover on clockwise. Dry water on the outer part of the tank.

4. Put the filter and the tank back. There will be “gurgling” sounds and air bubbles

would appear once the tank is placed correctly into the humidifier. Water in the tank

would then pass through the filter to be purified, sterilized and softened, which

would take 2 to 5 minutes. Once there are no more air bubbles, this indicates that

there is sufficient water in the gutter and is now ready for the humidifier to generate

mist.

Waterfilter

HUM /

SPEED

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steba LB6 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info