Operating voltage: 220–240 V (infinitely variable without switching)
Capacity: Stand-by stage approx. 30 W
working stage: approx. 500 W
Heat-up time: 3–5 mins.
Diameter hot-melt adhesive: 11 mm
Melting temperature: approx. 210° C (electronically controlled)
Recommended gluesticks: original STEINEL- or PATTEX
Technical specifications are subject to change without notice.
Technical datas
Operating guarantee
This STEINEL product has
been manufactured with
great care, performance
and safety tested according
to current regulations, and
then subjected to a batch
test.
STEINEL guarantees that it
is in perfect condition and
functions correctly. The
warranty period is 36
months, beginning with the
date of sale to the user. All
defects due to faulty materi-
al or manufacturing will be
corrected. The guarantee
will be met by repair or
replacement of defective
parts, at our option. Dam -
age to wearing parts, dam -
age or defects occurring
due to improper operation
or maintenance, and
breakage in a fall, are not
covered.Further conse-
quential damage to other
items is excluded.
Claims under the guarantee
will only be granted if the
product, not disassembled,
with sales slip or invoice
(date of purchase and
dealer’s stamp) is sent, well
packed, to the appropriate
Service Centre, or handed
in to the dealer within the
first 6 months.
Repair-Service
Our customer service de-
partment will repair faults
not covered by the guaran-
tee, or after the guarantee
has expired. Please send
the product, well packed, to
the nearest Service Centre.
8
9
GB
Check the glue gun for
damage before switching
it on (mains connection
lead, housing, etc.) and
do not use if damaged.
Repairs must only be
performed by a qualified
electrician.
A problem-free function-
ing is only guaranteed if
STEINEL and/or Henkel
glue sticks are used.
Do not use liquid or paste
glues!
Since the glue gun ope -
rates up to 200° C/392° F,
exercise caution when
using.
Only use the glue gun in
dry rooms.
Do not use in conjunction
with highly flammable/
combustible substances.
Do not leave the glue gun
unattended.
Keep it out of the reach
of children.
The parts to be glued
must be free of grease,
dry and absolutely clean.
When glueing process is
interrupted for more than
thirty minutes, turn off
glue gun by pulling out
electrical plug.
Protruding glue can easily
be removed with a warm
knife. Always discon -
nect the mains plug first.
When using our “super-
sticks”, residual glue can
be removed with heat or
painted over.
Small drops of glue can
be easily removed when
cold.
When introducing new
glue sticks please wait a
moment so that the cold
cartridge can be warmed
up. Under no circum-
stances push in with
force.
Pressing too hard may
jam the glue stick feeder
inside the applicator...
If this happens, heat
the applicator for about
10 min. and pull 3 – 5 mm
of the glue stick out of
the nozzle... if the glue
stick is too far in, heat a
new stick at the tip of the
applicator, fuse it with
end of the jammed glue
stick and carefully pull
forward.
Do not pull the glue
stick all the way out
of the applicator. Hot glue
running into the applica-
tor can cause damage.
After changing nozzle,
always make sure it is
screwed on tightly
(approx. 1 Nm).
Important points
Declaration of conformity
This product complies with
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
