537312
36
Zoom out
Zoom in
Vorherige Seite
1/288
Nächste Seite
HSE 41, HSE 51
English
34
Motor
HSE 41
HSE 51
Cutting blades
HSE 41
HSE 51
Weight
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
p
to
EN 60745-2-15
Sound power level L
w
to
EN 60745-2-15
Vibration measurement a
hv
to
EN 60745-2-15
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Observe measures to reduce vibration
exposure to protect the user – see
section on "Vibrations" in chapter on
"Safety Precautions and Working
Techniques".
Specifications
Voltage: 230 - 240 V
Rated current: 1.7 A
Frequency: 50 Hz
Power consumption: 400 W
Fuse: min. 10 A
Insulation: II, E
Voltage: 230 - 240 V
Rated current: 1.9 A
Frequency: 50 Hz
Power consumption: 430 W
Fuse: min. 10 A
Insulation: II, E
Sharpening angle: 36°
Tooth spacing: 21 mm
Stroke rate: 3,400/min
Cutting length: 450 mm
Sharpening angle: 36°
Tooth spacing: 23 mm
Stroke rate: 3,400/min
Cutting length: 500 mm
HSE 41: 2.9 kg
HSE 41
1)
:3.5kg
1)
Version with 10 meter appliance
cord for UK
HSE 51: 3.0 kg
HSE 51
1)
:3.6kg
HSE 41
450 mm blade: 84 dB(A)
HSE 51
500 mm blade: 84 dB(A)
HSE 41
450 mm blade: 95 dB(A)
HSE 51
500 mm blade: 95 dB(A)
HSE 41
Left handle: 3.4 m/s
2
Right handle: 2.3 m/s
2
HSE 51
Left handle: 3.3 m/s
2
Right handle: 1.7 m/s
2
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stihl HSE 51 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info