519639
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
To begin setup, insert the installation CD into your CD-ROM
drive, and the iWizard will start automatically.
- If it doesn’t, browse the contents of the CD and run the iWizard.exe.
- If you have no CD-ROM drive, please use this link to download
software installation: http://ipcam.storex.eu
- Select your language [Next]. Then choose IP camera to set up [ok]
Step 1 shows how to connect cables [Next]. Check the LED statut [Next].
Step 2 iWizard scan for available cameras on your local network.
- Select a camera and wait until the live video appears on the right.
(You can check Current settings with the camera's bottom sticker).
-You can verify FW versions from: http://ipcam.storex.eu
Click [Next] when you’re ready. Meanwhile, if you see the
Windows Security Alert dialog box during the search, please
choose [Unblock].
The default password is "admin". If you need you can change it
(please note down your new password).
Click [Next] to skip this process.
Check the camera name, date and time setting.
Package Contents
Please check the package contents. If anything is missing, please don’t
hesitate to contact your local distributor.
Network camera RJ-45 LAN cable
Power adaptor (12V, 2A) & cable Quick start guide
Installation CD Wall mount plate
Screw for ceiling mount x 3,
screw anchor x 3, camera pad x4
Connecting the Cables
LAN cable from PC to hub/router: If your LAN cable from PC has
been connected to the Cable/ADSL modem, please re-connect it
to the LAN port of your hub/router.
LAN port on camera: Use the bundled RJ-45 LAN cable to connect
the LAN port of the IP camera to the LAN port of your hub/router.
Wireless adaptor (optional accessory): If you have purchased the
Storex USB wireless adaptor, plug it into the USB port of IP camera
for wireless reception. it can only supports the wireless adaptors
from Storex; please do not use other USB adaptors on Storex IP
camera.
Power: Attach the power adaptor to the cameras power connector
and connect the power plug to a power outlet.
Camera Layout
IR LEDs x 6 (12 in total)
Light sensor
Lens
IR LEDs x 6 (12 in total)
Microphone
LED status indicator
USB Wireless adaptor connector
Power connector
Ethernet port
I/O box connector
Audio output
microSD/SDHC card slot
Reset button
Microphone input
*
Do not rotate your PTZ camera manually as it may damage it
Network Camera
Quick Installation Guide
Video Installation:
http://installipcam.storex.eu
Mounting the Camera
Fix the mounting plate.
Let fastening bracket slide into its position on the camera base (as circled).
Attach the IP camera.
Push and hold the bracket to the right.
Loosen the screw that xes the trapezoid-shaped fastening
bracket
Tighten the screw on the fastening bracket.
DNR-30H
Installing Camera Software
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Storex DNR-30H Network Camera wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Storex DNR-30H Network Camera

Storex DNR-30H Network Camera Bedienungsanleitung - Englisch - 74 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info