424428
5
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
Part 1 • English
www.strongsat.com 7
highlighted menu item.
6. Exit Button
Exits from the current menu or cancels the current operation in progress if applicable
7. Common Interface Slots
Behind the lid of the front panel you will find two slots where you can insert your
Common Interface Modules.
8. LCD Display
The 4-digits display the channel number. In "stand-by" mode, the 7 segments display
the local time.
2.2 Rear Panel (Please see inside cover Figure 2)
1. LNB IN
Connect the digital signal from your LNB of your satellite dish to this connector.
2. LOOP OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
3. AUDIO Right (Red RCA) and Left (White RCA)
These connectors give you tile possibility to connect the audio signal to an external
amplifier or to the audio input of your TV.
4.VIDEO (Yellow RCA)
This connector has a constant video signal for additional VCR-connections
5. DC 0/12V I50mA OUT (Black RCA)
This connector gives you the possibility to connect a device, operated by 0/12 Volts,
150mA supplied by your receiver (e.g.: to switch between 2 satellites by using a 0/12V
switch). This RCA can be activated via the On Screen Display (satellite set-up). Be
careful when connecting and activating this Black RCA. The 0/12V current can cause
severe damage to your equipment if connected in the wrong way.
6.TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
7.VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart cable.
Your video signal will now be looped through to your TV.
8. RS232 Serial Port
This serial port can be used to connect your PC to your receiver, and enables you to
Part 1 • English
8 www.strongsat.com
download new versions of software into your receiver. Detailed information about
downloading software into your receiver can be found on our website
(www.strongsat.com
).
Note: It is recommended to ONLY use tile original software provided via our website.
Loading other versions of software not adapted to your model number might cause
severe damage to your receiver, and will not be covered by Strong.
9. ANT
RF Modulator (female pall). If you have cable TV or if you have an outdoor antenna,
then you can connect the RF cable coming from the antenna or wall connector to this
ANT input, if you use a scart cable to connect the receiver to your TV, the additional
antenna can be put directly into your TV.
10. TV/VCR
RF Modulator (male part). If you do not use a scart cable to connect your receiver to
your TV, or if you have connected a cable to the ANT input, you will have to use this
connector to connect the receiver to your TV by using a coaxial cable.
11. S/PDIF
Use this Optical output to connect your receiver to the input of your digital audio
amplifier.
12. Power Cord
Your receiver requires a current of 90-240V AC (Auto-selectable),50-60Hz+/-5%.
Make sure to check the power specification of the wall outlet before connecting your
receiver to the main power
2.3 Remote Control Unit (Please see inside cover Figure 3)
All features of the set-top box can be controlled with the remote control.
Inserting batteries to the Remote Control Unit:
1. Open the bottom cover on the backside of the remote control Unit.
2. Insert the two supplied batteries (1.5V) observing the polarity (+/-) and the "AAA"
specification.
3. Firmly replace the bottom cover.
1. LANG (Language)
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong srt 4356 pvr wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info