568530
14
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
10
PART 1 • English
OSD Transparency: To set the OSD transparency from Off ~ 50%.
OSD Timeout: To define how long the information banner is to be shown (5S~10S)
Load Default OSD Setting:
To clear all OSD settings and reset to default value.
5.3.7 Parental Lock
This menu allows you to protect the installation menu or channels with a password. You can also
change the password here. When entering the menu you will be asked to input the password
(default: 0000).
Menu Lock: Locks the installation menu. You can set the menu lock to ON/OFF.
Channel Lock: Off/Manual/Age: 4 - Age: 18
New Password: Input your new password here to change the password.
Confirm Password: Input your new password again to confirm the new password.
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby is ON.
The receiver will switch to standby automatically when it doesn’t receive commands from the remote
control for three hours. To avoid the automatic switch off, set Auto Standby to OFF.
5.4 Tools
Press MENU to enter the Main Menu. Select Tools with the pq buttons and press OK to enter.
1. Use pq to highlight the menu of choice and press OK to enter.
2. Press EXIT to leave.
5.4.1 Receiver Information
This menu displays relevant receiver information like the receiver model, software version, signature,
and our website www.strong.tv.
1. In the Tools menu, select Receiver Information and press OK to open receiver information.
2. Press EXIT to leave.
5.4.2 Game
This menu allows you to play games (Tetris, Snake and Othello) on this receiver.
1. Select "Game" in the Tools menu and press OK to enter the game menu.
2. Use pq to select a game and press OK to enter the game. Highlight Start and press
OK to start the game. For changing levels highlight Setup and use the tu buttons.
3. Press EXIT to quit the game.
NOTE: You can also press OK to pause playing.
5.4.3 Load Factory Default
This option allows you to reset the receiver to factory settings, which clears all stored channels and settings.
WARNING: This option will permanently delete all your settings and channel lists and set
your receiver to factory default! Please use with caution.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 5302 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 5302

Strong SRT 5302 Bedienungsanleitung - Deutsch - 22 seiten

Strong SRT 5302 Bedienungsanleitung - Französisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info