568531
14
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
11
PART 1 • English
English
Repeat All/O
Info option, select Music info or Lyrics, ifapplicable.
2: Browse by thumbnail orfolder.
3: When folder is selected, change the folder’s size: small, normal orbig.
10.2.3 Photo
1: Set Option.
Random play order On/O
Repeat All/O
Interval time: slow, medium,fast
2: Browse by thumbnail orfolder.
3: When folder is selected, change the folder’s size: small, normal orbig.
NOTE: During Photo play, you can select music to play along with the pictures with the 2button.
Press tu to rotate thepicture.
10.2.4 MyRecorder
1: Open the Editwindow.
The name of a programme can be changed, follow the procedure with the coloured
buttons, as in the TV channel editmenu.
2: Device, view disk information, select partitions, format the disk if needed (FAT32)
NOTE: Formatting the disk will erase all content onit.
3: Select les to bedeleted.
4: Delete selectedles.
10.3 RecorderSetting
This menu allows you to set the Record Setting.Press pq to select the desired item and tu to change
thesetting.
Timeshift time: OFF/AUTO/TIMESHIFT
OFF: No Timeshift possible, no space reserved on USBdevice.
AUTO: Timeshift data saving will automatically commence after each channel change, meaning,
it is possible to go back some amount of time on the watched channel, depending on
reserved space on USBdevice.
2: Time shift data saving will only commence if TIMESHIFT is pressed on remote control, and
picture will freeze. Continue watching with u button. Stop time shifting with 3.
One Button Recording: ON/OFF.
OFF: After pressing RECORD you have the possibility to enter a recording period, default is 2.00
hours. Press OK to startrecording.
ON: Recording will start immediately when RECORD is pressed, without the possibility to enter
a recordperiod.
Default Recording Period:
Maximum/00:15~24:00, increasing quarter of an hour progressively. Default is 2.00hours.
10.4 DeviceRemoved
For safely removing a USB device, to prevent data loss and damage to unit and/or device. A removed device can
become active again if you disconnect and reconnect the USB device. In the USB menu, select Device Removed
and press OK to conrm. Then a window is displayed. Press OKagain.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 80 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info