Bedienungsanleitung Strong SRT 8106 (Seite 5 von 23) (Englisch)

480567

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

PART 1 • English

1.0 INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

 In a closed or poorly ventilated cabinet; directly on top of or under any other

equipment; on a surface which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

 To direct sunlight or any other equipment that generates heat; to rain or intense

moisture; to intense vibration and to any shock which may cause permanent damage

to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

 Do not use a damaged power cord. It may cause a ﬁre or an electric shock. Do not

touch a power cord with wet hands. It may cause an electric shock.

 When the receiver is not used for a long period of time, you should unplug the power

cord from the wall socket.

 Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may

clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution,

and only after disconnecting from the mains voltage supply. Make sure no foreign objects

fall through the ventilation slots because this could cause ﬁre or an electric shock.

 Do not place any objects on top of the receiver because this might prevent proper

cooling of the components inside.

Safety Precautions

 Never try to open the receiver. It is dangerous to touch the inside of the receiver

due to high voltages and possible electrical hazards. Opening the receiver will

void the warranty of the product. Refer all maintenance or servicing to suitably

qualiﬁed personnel.

 When you are connecting cables, be sure that the receiver is disconnected from the

mains supply. Wait a few seconds after switching off the receiver before you move the

receiver or disconnect any equipment.

 Use only approved extension cords with compatible wiring that is suitable for the

electrical power consumption of the installed equipment. Please ensure that the

electrical power supply corresponds with the voltage on the electrical identiﬁcation

plate at the back of the receiver.

If the receiver does not operate normally even after strictly following the instructions in this user

manual, it is recommended to consult your dealer.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against

electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep

the packaging away from children. When transporting the receiver from one place to another or if you

are returning it under warranty conditions, make sure to repack the receiver in its original packaging

with its accessories. Failing to comply with such packaging procedures could damage the product

and void your warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8106 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info