Bedienungsanleitung Strong SRT 8502 (Seite 16 von 21) (Englisch)

480561

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Українська

Current Date: Select the current date in the submenu that opens after you click OK.

This option is available, if Auto time setting is set to Oﬀ.

Current Time: set the current time using the number buttons. This option is available,

if Auto time setting is set to Oﬀ.

Auto channel update: if set to On the receiver will update the channel settings in the standby

mode. Upon detection of new channels on the air receiver will oﬀer to

add them to the list of channels. Click OK. To save the changes.

Auto stand-by: This feature allows you to set the time period over which the receiver

automatically switches to standby if during this period, the receiver

did not receive any commands. You can refuse to use this feature by

setting the Oﬀ, for example, to activate the receiver or replace the

software by aerial signal. Also, you can change the auto disconnection

from 1 to 12 hours.

6.3.2 Set Timer

The timer function allows you to adjust the receiver on and oﬀ on schedule. Setting the timer from the TV

Guide is the most convenient solution, however, you can set timers manually.

In the menu Timer to select the submenu Set the timer. After clicking OK appears on the screen list of

timers, which displays a summary of the conﬁgured timers: number, channel name, date, start and end

times, repeating timer, and his status.

NOTE: if there are no timers are conﬁgured, then the timer list will be empty.

You can add, change or delete the timer.

To add a timer, press RED button. In the menu that appears, set the timer, the required parameters:

Channel: To select a channel, press OK in the proposed list, select a channel

and press OK to conﬁrm. The name of this channel will appear in the

options Channel:

Loop: select a repeat of the cycle timer. Once - the timer will be executed

once, after which it will be removed from the list of timers.Daily - the

timer will run at a speciﬁed time each day. Weekly - the timer will run

once a week at this time. In this day of the week will match the day of

the week the date speciﬁed in the date.

Date: Enter the date when the timer should enable the receiver.The date

format "day / month / year."

Time: Enter the time, turn the receiver on a timer.

Duration: Enter the time during which you wish to make viewing the

program timer.

Activate, select Yes to activate the timer

After pressing the EXIT on the list of displayed timers installed a timer is added to the list of timers

Upon occurrence of the start of the timer unit will operate according to the current regime:

 If the receiver is turned on, then 10 seconds before the start of the timer unit will notify you of

an event timer. You can take the timer by pressing the OK, or to abandon the timer by pressing

the EXIT. At the end of the timer unit will be switched to the channel you viewed before

the timer.

 If the receiver is in standby mode, it automatically turns on and oﬀ at set times.

To edit a timer, buttons pq note marker in the list of timer that you want to edit and press OK button

on the remote.In the menu, timer, make the necessary changes and press the EXIT. All changes will be

saved in the timer list.

To remove the timer, buttons pq note marker in the list of timer that you want to delete and press

BLUE button on the remote. This timer will be removed from the list of timers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8502 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info