Bedienungsanleitung Strong SRT 8550 (Seite 25 von 28) (Englisch)

751661

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

1.32.2 RSS (Really Simple Syndication)

This menu allows you to select a link to read the latest RSS news from dierent sources or to add your

own links.

Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read. Press

 to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the GREEN

button Add RSS Feed to open the keyboard. Use pq and tu to enter values. If you need to use special

characters press P+/P. To save the created RSS link, select Save and press OK.

1.32.3 Weather

This menu allows you to watch the weather in your region.

Use pq to highlight the menu item Weather from the Network menu. If you have correct Internet

connection then the weather page will show up with details on screen.

Use the YELLOW button City List to open a selection list with main cities. Use pq to highlight a major

city near you and press OK to select.

You can enter a city manually. Press the GREEN button Change City to open a keyboard. Use pq tu

to enter. If you need to use special symbols, press P+/P. To save the name, select at the end Save and

press OK.

Press the RED Refresh button to refresh information on screen.

Press the BLUE Change Temp Standard button to switch between Celsius and Fahrenheit temperature

format.

1.32.4 IP Settings

This menu allows you to setup or check the Internet connection. The default selection is DHCP set to

On. Normally the setup is done automatically by this. To test if the Internet connection works, select the

item SET and press OK. If successful, a pop-up message box will show up and you can start using it. If not

successful, then check your cable or router. Alternatively set DHCP to O. Then manually enter your IP,

Gateway and DNS values by using the 0 ~ 9 buttons. Select after entering these values the item SET and

press OK to store and to check.

A.1 Troubleshooting

There may be various reasons for abnormal operation of the receiver. Check the receiver according to

the procedures shown below. If the receiver does not work properly after checking it, please contact

your dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to

open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.

Problem Possible cause What to do

LED indicator is not lit The mains lead is unplugged Check the mains plug

No signal found The antenna is disconnected

The antenna is damaged/

misaligned

Out of digital signal area

Active antenna requires to switch

ON the antenna power/external

power

Check the lead of the antenna

Check the antenna

Check with your dealer

Switch the antenna power of the

receiver ON/connect external

power

No picture or sound on

TV or amplier

HDMI or SCART is not selected on

your TV or amplier or the unit is

set to higher resolution as the TV

supports.

TV/amplier is not switched on

Switch to correct TV/amplier input

Select lower resolution on receiver

Switch TV/amplier on.

Check if S/PDIF connection is used.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8550 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info