20. F1 Sleep Timer.
21. F2 Subtitles.
22. F3 No function
23. TXT Teletext
3.0 CONNECTIONS
3.1 Connecting to TV & VCR
Basic connection with a SCART cable (Fig. 3)
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set.
Basic connection with an RCA cable (Fig. 4)
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the Video RCA connector at the back of the receiver to the Video IN RCA connector on your TV set.
Audio IN VIDEO IN
3. Connect the Audio Left and Right RCA connectors at the back of the receiver to the Audio Left and Right IN
connectors on your TV set or audio amplifier.
Advanced connection of the receiver to the TV set and DVD/Video recorder
(Fig. 5)
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART-in connector on your TV set.
3. Connect the VCR SCART connector at the back of the receiver to the SCART-in connector on your VCR.
3.2 Connecting to Digital Audio Amplifier
Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver. (Fig. 6)
3.3 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver (Fig. 7)
First choose a satellite you want to receive your signals from, and have your dealer aim your dish at the requested satellite.
Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your receiver.
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig. 8)
If you want to watch programs from more than one satellite (For example from ASTRA and from HOT BIRD) it is advisable to
use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the dishes at the requested satellites and connect the LNB’s
with coax cables to the IN connectors of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the
SAT IN connector at the back of your receiver.
Connecting a dish on a motorized positioner to your receiver (Fig. 9)
Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized DiSEqC 1.2 positioner.
Have your dealer mount the dish to the positioner, set the correct angle of the elevation and let him set the center point for
your positioner. Connect the LNB with a coax cable to the SAT IN connector of the positioner, and connect the OUT connector
of the positioner to the SAT IN connector at the back of your receiver.
3.4 Connecting to computer by serial cable
Connect the RS-232 connector on the back of your receiver to the serial port of your computer using a serial (crossed Sub
D9) cable. You’ll find instructions how to download software and a loading tool on our website www.strong.tv (support >
download). (Fig. 10)
4.0 STARTING UP FOR THE FIRST TIME
Ensure your satellite receiver is connected correctly to your television and dish, and that your satellite signal is of good quality.
(If you are not sure about this then ask your local STRONG dealer to check your installation or satellite signal.) Confirm that
the power plug on the receiver is plugged into the wall outlet. Turn on the receiver. It is recommended that you perform the
first time installation following the Installation Wizard step by step. It will help you to easily achieve system configuration and
channel installation. If you are a professional installer then you can skip wizard by pressing EXIT button and set-up channels
using the Installation menu, for details refer to chapter 5.1.
