750861
27
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
23
English
English
Symptom Cause Remedy
The standby indicator does
not light up
The mains lead is unplugged/
the multipoint connector is
switched off.
Check the mains lead/switch the multipoint
connector on.
There is no image, no sound,
no display
There is no power supply Check the connection cables
There is a short circuit in
coaxial cable
Disconnect device from mains power
supply, eliminate the short circuit in the
coaxial cable or connections, reconnect,
and activate device
Cables are missing or
defective.
Check your connecting cables
A wrong video format was
selected in the OSD settings
Check the settings to make sure your TV
supports the selected format
There are small blocks in the
video, occasionally no sound,
occasionally no signal
The signal is too weak Check for defective cables or connectors.
Alternatively, reduce the coaxial cable
length
Scrambled channel message The channel is scrambled. Select an alternative channel.
No response to remote
control
The receiver is off. Plug in and turn on the plug.
The handset is not aimed
correctly.
Aim the handset at the IR sensor.
The IR sensor is obstructed. Check for obstructions.
The handset batteries are
exhausted.
Replace the handset batteries.
Password forgotten The default password is 0000 Contact the local Service Hotline or send an
email to our support via www.strong.tv
The external USB HDD does
not start.
The power consumption is
too high.
Connect an extra power supply adapter to
your USB HDD device.
The receiver switches to
standby automatically.
The Auto Standby function
is activated and has reached
the set time (default 3 hours).
Set the power down time or disable it in the
SettingsTime Setting menu, parameter Auto
Standby After.
13.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S2 8PSK/QPSK: 2 ~ 45 Ms/s
FEC decoder: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 QPSK mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode
Video
Profile level: H.264, H.265, VP9
Max. video resolution: 2160p
Aspect ratio: 4:3 and 16:9
Video resolution: HDMI: 480i/480p, 576i/576p, 720p, 1080i, 1080p, 4Kx2K
SCART: PAL
Audio
Audio decoding: MPEG-1 LAYER 1&2, E-AC-3
Audio mode: Stereo L/R, Dolby® Digital, Dolby® Digital Plus*
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT7840 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT7840

Strong SRT7840 Bedienungsanleitung - Italienisch - 31 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info