549821
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
3
Tighten the four screws and insert the base cap down over the feet.
3. mounting the switch box
“caution” never remove the inner pipe stopper if you remove the Inner pipe stopper service may be necessary. Never
loosen the
Inner pipe set screw
(1) locsen the switch box set screw by turning it to the left
(2) now place the hole in the bottom of the switch box over the inner
pipe.
(3) turn the switch box set screw clockwise and tighten it firmly
mounting nose of the fan
parts identification of the fan nose
1- motor
2- rear guard
3- guard lock nut
4- blade
5- blade cap
6- front guard
7- screw
4. mounting the rear guard.
Mount the rear guard on the Motor and secure it with the Guard
lock nut.
5. mounting the blade
insert the blade onto the motor shaft. Tighten the blade with
the blade cap.
6. mounting the front guard
there are two type construtions of fan front guard, each is assembled
according to followings
(1) mounting the reticular guard
a. mounting the front guard by inserting the hook at the top side of the
front guard over the rear guard. unite them by pressing their sides in order
that the two guards are fixed in the external plastic ring.
b .lock the clip and secure it with the screw.
HOW TO USE SAFELY
- Never touch the engine with your hands or feet if they are wet, damp or naked
- Before cleaning the fan pull the plug from the outlet
- Remove the plug from the outlet when not in use
- To eliminate risk of short circuit does not immerse the motor in water or any other liquid
- This appliance is not intended for use by persons (including children) with reduced
Physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
- If the appliance, the plug or power cord show visible damage, do not use it and
ensure it checked by qualified people
- To avoid overheating, it is recommended to remove the power cable for its entire length
- Do not link to be taken not recommended by the manufacturer
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

suntec-wellness-cool-breeze-4000-sv

Suche zurücksetzen

  • Wie bekommt man die plastik schraube ab,damit man das rad montieren kann?! Eingereicht am 24-6-2019 20:47

    Antworten Frage melden
  • Ich habe das gerät gekauft aber beim Motor ist eine graue schraube da vor und das schutzgitter kriecht man nicht ran und die motor blätter kriecht man auch nicht ran ich frage mich man die graue schraube ab kriecht Eingereicht am 25-7-2018 15:26

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Suntec Wellness Cool Breeze 4000 SV wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Suntec Wellness Cool Breeze 4000 SV

Suntec Wellness Cool Breeze 4000 SV Bedienungsanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info