Instruction:
1. Turn the rotary button to “ON”, the green light will light up and the humidifier will start.
2. It will take 2-3 minutes to start spraying.
3. Turn the rotary button to “OFF”, the humidifier will turn off and the green light goes
out.
4. When the humidifier is empty, the red light will light up to alert you that the water tank
is empty..
If you want to continue to use the humidifier, please turn off the humidifier first and
add water into the water tank. Then turn on the humidifier again and it will rework
within 2-3 minutes.
Caution: Do not touch the socket when your hands are wet. Otherwise you may get
an electronic shock!
Rewater:
The Humidifier should refilled with water again when it works over 8 hours.
Cleaning:
Clean the humidifier every week.
Caution:
Do not use detergent or other harmful solvent to clean the humidifier.
Cleaning steps:
1. Clean the rust:
a. Move the water tank.
b. Pour 0.225ml vinegar concentrate in the water tank and trough, let the liquid
stay in it for 20 min.
c. Swab it with soft cloth.
d. Wash the water tank and trough with warm water.
2. Disinfect:
a. Fill the tank with 1 teaspoon of chlorine bleach solution and 4.0 liters of water.
b. After 20 minutes, stir water every few minutes until all surfaces are wet.
c. Pour out the water, wash the water tank.
Use the same way to clean the trough.
Store:
1. Dry the tank and trough.
2. Pack and place the humidifier at aeration agitation area.
Important:
Refer to the instruction if you meet a problem. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent in order to avoid a hazard.
