GB
19
PLAYBACK OF AN ENTIRE CD/MP3/
PLAYBACK OF A SPECIFIC TRACK/
PROGRAM FUNCTION /
MUTE FUNCTION (VIA REMOTE CONTROL)
PLAYBACK OF AN ENTIRE CD/MP3
1. Playback begins by pressing the button PLAY/PAUSE
(11). Playback begins with the first track. The display
shows the track that is currently being played, and
how much of the track has already elapsed.
2. To interrupt playback, press PLAY/PAUSE. The
elapsed playback time will blink.
3. To resume playback, press PLAY/PAUSE again.
4. To end playblack, press STOP (5).
PLAYBACK OF A SPECIFIC TRACK
1. First complete steps 1-4 from the section CD/MP3
operation.
2. Press the button SKIP/SEARCH (FORWARD or
REVERSE) (10/12) on the appliance (or the remote
control) until the desired track number appears on
the display.
3. Then press the PLAY/PAUSE button (11).
4. If you press the button SKIP/SEARCH (FORWARD or
REVERSE) during playback, you can skip to the next
track or return to the beginning of the track being
played.
NOTE: If you wish to skip the MP3 or CD forwards or
backwards at a faster rate, you can use the +10 (11) or -
10 (12) buttons on the remote control. This skips forwards
or backwards 10 tracks.
PROGRAM FUNCTION
This function can be used to store up to 99 tracks to be
played in a specific order.
1. To use this function, make sure that the appliance is in
stop mode, i.e. press the STOP button (5) once. Press
the PROGRAM button (4), and “00” will begin to
blink in the display (8). “PRG” also appears in the
display.
2. To search for the first track to be saved, use the SKIP
UP or SKIP DOWN buttons (UP or DN) (10/12).
3. Press the PROGRAM button to save the track.
4. To program more tracks, repeat steps 2 and 3.
5. To play back the tracks you have saved, press the
PLAY/PAUSE button (11). The individual track
numbers will appear in the display (8).
6. To skip to the next saved track, press the SKIP UP
button (10).
7. When playback of all saved tracks has finished, the
CD player returns to stop mode.
Tip: As soon as you save a new program, the previous
saved tracks are overwritten.
MUTE FUNCTION
(VIA REMOTE CONTROL)
Using the MUTE button on the remote control, you can
reduce to volume level directly to “0”.
1. If you press the Mute button (5) on the remote
control one, the volume display blinks and sound is
interrupted.
2. If you press the MUTE button a second time, the
volume and audio playback is returned to the level it
was at previously.
