53171
7
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
802.11g Wireless Router User’s Manual
6
LED does not light up, then your connection speed is 10Mbps.
Link/ACT Green. The Link /ACT LED also serves two purposes. If the LED is continuously lit, the
Router is successfully connected to a device through the corresponding port. If the LED is
flickering, the Router is actively sending or receiving data over that port.
EWAN LED Indicators:
10/100 Green. The 10/100 LED lights up when the corresponding port is 100Mbps connection. If this
LED does not light up, then your connection speed is 10Mbps.
Link/ACT Green. The Link /ACT LED lights up when a successful connection is made between the
Router and your cable or DSL modem. The
Link/ACT
LED flickers when the Router is
sending or receiving data over the EWAN port.
The Router’s Rear Panel
The rear panel of WF514 contains the port connections listed below.
Viewed from left to right, the rear panel contains the following features:
Four local (LAN) 10/100 Ethernet ports for connecting the Router to the local PCs or hub, switch
Ethernet WAN (EWAN) port for connecting the Router to a Cable or DSL modem
Factory Default Reset push button
DC power connector for connecting through an AC power adapter (included as part of the product) to
the wall power outlet
Wireless antenna connector
The Hardware Reset Button
The Reset button can be used in one of two ways:
1. Reboot the Router while keeping all of its settings.
If the Router is having problems connecting to the Internet, press the Reset button for just a moment
with a paper clip or a pencil tip. This clears up any jammed connections.
2. Restore the Routers factory defaults and clear all of its settings, including a new password or wireless
settings.
If you are experiencing extreme problems with the Router and have tried all other troubleshooting
measures, press the Reset button and hold it down for 10 seconds.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sweex IEEE 802.11g Wireless Router wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info