BCF 811 Baby Monitor
ENGLISH
Operating manual
Please read and observe the following in
formation and keep the operating manual
nearby for future reference!
20
19
18
17
16
15
14
13
12
9
8
7
6
5
4
3
2
1
21
22
10
11
Safety information
WARNING!
• Risk of fatal injury through cable!
Children could become entangled in the cables and strangle
themselves.
Ensure that the baby monitoring units and power cables are
out of reach of babies/children, i.e. they are at least one meter
away.
• Risk of explosion!
Only use the power adapter plugs supplied!
Only use batteries supplied or ones of the same type!
Always treat batteries with due care and attention and only
use batteries as described.
Never use standard and rechargeable batteries together.
Never use rechargeable batteries or standard batteries with
different capacities or charge statuses together. Never use
standard or rechargeable batteries which are damaged.
• Risk of suffocation through small objects, packaging and
protective foil!
Keep children away from the product and its packaging!
CAUTION!
• Risk of fire through power adapter plugs!
Power adapter plugs can heat up.
Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or
such.
• Risk of tripping due to improperly laid cable!
Lay the cables so that nobody can trip over them!
• Risks to health and the environment from batteries!
Never open, damage or swallow batteries or allow them to
pollute the environment. They could contain toxic and ecolo
gically harmful heavy metals.
Operating elements
Receiver unit
1 Display
2
button (switch receiver unit on/off)
3
(menu, zoom)
4 Microphone
5 Loudspeaker
6
button (raise volume, change setting)
7
button (lower volume, change setting)
8 Operating indicator
9 Connection quality indicator
10 Power adapter socket
11 Belt clip
12 Battery compartment cover
Transmitter unit
13 Night light
14 Light sensor
15 Camera
16 Microphone
17 Operating indicator
18
switch (transmitter unit on/off)
19 Loudspeaker
20 Power adapter socket
21 Antenna
22
button (register device)
Intended use
The baby monitor serves to monitor a baby/child in a room. The
transmitter unit, located near the child, transmits noises and images
from its immediate vicinity to the receiver unit. Any other use is con
sidered unintended use. Unauthorised modification or reconstruction
is not permitted. Under no circumstances open the devices or com
plete any repair work yourself.
The devices are not intended for medical purposes. Warning
and signal tones from respiratory or heartbeat monitoring equip
ment are not transmitted.
Use only in suitable environments
Observe all local directives and regulations.
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
Package contents
- Receiver unit
- Transmitter unit
- Battery pack for receiver unit
- 2 power adapter plugs
- Operating manual
Display and explanation of operations
Æ Action to take
Result of action
[2] Reference in the graphics
Press the button
Press and hold the button
5 sec. Keep the button pressed for 5 seconds
Starting up the receiver unit
The receiver unit is powered by the battery pack.
Inserting the battery pack in the receiver unit
Slide the battery compartment cover [12] on the rear downwards
and remove it.
Plug the connection plug on the battery pack in the power socket
and then insert the battery pack in the battery compartment.
Close the battery compartment cover.
Charging the battery pack
Connect the power adapter to the power socket [10] on the trans
mitter unit and a properly installed mains power outlet.
Switching the receiver unit on/off
2 sec.
[2] Receiver unit is switched on, start screen
appears in the display.
2 sec. [2] Receiver unit is switched off, the display
goes out.
Switching the display on/off
[2] Display is switched off, only sound is played.
Press any button Display is switched on, image and sound are
played.
The display switches on when signals are received according to
the sensitivity of the VOX function setting. When the VOX func
tion is deactivated, the display remains switched off until you press
any button.
Starting up the transmitter unit
The transmitter unit operated by power supplied via the power ad
apter plug.
Switching the transmitter unit on/off
The transmitter unit continues to transmit even when the receiv
er unit is switched off. The signals can be received by other
devices.
Set
[18] to ON Transmitter unit is switched on, operating
indicator [17] lights up green.
Registering a transmitter unit
The transmitter unit supplied is registered on the receiver unit at the
factory. A maximum of 4 transmitter units can be registered on the
receiver unit. Proceed as follows to register another transmitter unit:
Press [3] until the camera icon appears in the display.
[6] / [7], [2] Select transmitter units C1 to C4 and
confirm them, connection quality indicator [9] flashes for 10 seconds.
Set [18] to ON Transmitter unit is switched on, operating
indicator [17] lights up green.
[22] Register the transmitter unit on the receiver unit.
If the registration process fails, Out of Range appears in the
display. Repeat the process.
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be
selected manually. Transmitter unit 1 is selected as standard.
Press
[3] until the camera icon appears in the display.
[6] / [7], [3] Select transmitter units C1 to C4 and
confirm them.
Individual settings can be defined for each transmitter unit.
Scan modus
If several transmitter units are registered, you can programme the
receiver unit to switch between the transmitter units registered at
10-second intervals. The signals from the transmitter units are
played in succession.
Press
[3] until the camera icon appears in the display.
[6] / [7], [3] Select SCAN and confirm it.
Icons in the display
Signal strength
The equipment has a range of up to 250m. The range can be
reduced by obstructions, such as walls etc. Electronic equip
ment in the vicinity can also cause disturbance.
Battery pack fully charged.
Battery pack discharged.
VOX mode (sound activation)
Signals picked up by the transmitter unit are transmitted to the re
ceiver unit. You can adjust the sensitivity by which the transmitter
unit detects the acoustic signals.
Switching VOX mode on-off / Setting the sensitivity
Press [3] until VOX or OFF appears in the display.
[6] / [7] Select one of the 5 levels of sensitivity or OFF.
[3] Confirm the setting.
If the transmitter unit does not transmit an acoustic signal to the
receiver unit for a period of one minute, the receiver unit display
goes out.
Night vision function
If the brightness of the area monitored no longer suffices for normal
operation, the equipment automatically switches to night vision.
Brightness
Press [3] until appears in the display.
[6] / [7] Select one of the 5 brightness levels.
[3] Confirm the setting.
Night light
The transmitter unit is equipped with an built-in night light [17]. You
can switch the night light on and off via the receiver unit.
Press [3] until the moon icon appears in the display.
[6] / [7] Select ON or OFF.
[3] Confirm the setting.
Zoom
You can switch between two zoom factors in order to enlarge or
reduce the image section monitored by the transmitter unit.
2 sec. [3] Select x2 or x1.
Power adapter plug, receiver unit
Using the energy-efficient power adapter plug (input 100-240V
AC
,
output 6V
DC
, 600mA) the zero load is approx. 0.19W. The average
efficiency is approx. 72.1%. The maximum power consumption is
approx. 2.68 W.
Power adapter plug, transmitter unit
Using the energy-efficient power adapter plug (input 100-240V
AC
,
output 6V
DC
, 600mA) the zero load is approx. 0.17 W. The average
efficiency is approx. 72.3 %. The maximum power consumption is
approx. 1.72 W.
Service hotline
In the case of technical problems, contact our Service hotline.
Switzerland: Tel. 0900 00 1675 (national charges, Swisscom at time
of going to print: CHF 2.60/min).
In the case of claims under the terms of guarantee, contact your
sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic
and electrical devices, owners are obliged to dispose of old elec
tronic and electrical devices in a separate waste container. The
adjacent symbol indicates that the device must not be disposed of in
normal domestic waste!
You are legally obliged to dispose of power packs and batter
ies at the point of sale or in the corresponding containers
provided at collection points by local public waste authorities.
Disposal is free of charge. The symbols indicate that the
batteries must not be disposed of in normal domestic waste
and that they must be brought to collection points provided
by local public waste authorities.
Packaging materials must be disposed of according to local regula
tions.
Guarantee
SWITEL equipment is produced and tested according to the latest
production methods. The implementation of carefully chosen materi
als and highly developed technologies ensure trouble-free function
ing and a long service life. The terms of guarantee do not apply to
the batteries or power packs used in the products. The period of
guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the
period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tamper
ing by the purchaser or third parties. Damage caused as the result of
improper handling or operation, normal wear and tear, incorrect
positioning or storage, improper connection or installation or Acts of
God and other external influences are excluded from the terms of
guarantee. In the case of complaints, we reserve the right to repair
defective parts, replace them or replace the entire device. Replaced
parts or devices become our property. Rights to compensation in the
case of damage are excluded where there is no evidence of intent or
gross negligence by the manufacturer.
If your device does show signs of a defect within the period of guar
antee, please contact the sales outlet where you purchased the
SWITEL device, producing the purchase receipt as evidence. All
claims under the terms of guarantee in accordance with this agree
ment can only be asserted at the sales outlet. No claims under the
terms of guarantee can be asserted after a period of two years from
the date of purchase and hand-over of the product.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications
terminal equipment and the mutual recognition of their con
formity. Conformity with the above mentioned directive is confirmed
by the CE mark on the device. To view the complete Declaration of
Conformity, please refer to the free download available on our web
site www.switel.com.
