ing and conference facilities. These supplementary services can be
used by implementing the Flash function (Flash). Please con
tact your telephone network provider regarding which Flash time
must be set to use the supplementary services. Also contact your
telephone network provider with regard to enabling supplementary
services.
Activating the Flash function
Æ Dial the contact
Æ Flash ÊFlash function is activated
Setting the Flash time
Æ Menu
BSSettings FlashTime
Æ Flash1 / Flash2
Paging
Æ ÊThe handsets registered on the base station ring.
SOS (emergency call) settings
You can assign a phone number to the key which is called in
Handsfree mode as soon as an emergency call (SOS) is triggered.
Entering an SOS number
The SOS number is stored in the phone book under the entry
"SOS".
If no "SOS" entry is stored in the phone book yet, create an SOS
call number as follows:
Æ
[Enter the SOS number] Next
Æ [Select a melody]
Editing/Deleting the SOS number
To edit or delete the SOS number, proceed as in the case of other
phone book entries.
Triggering an SOS call
Æ
Registering/Deregistering handsets
Up to 5 handsets can be registered on the base station. A condition
for this is that the handsets to be registered comply with the GAP
standard. The PIN is required in order to register/deregister hand
sets. On leaving the factory, the PIN was 0000
Registering a handset
Æ 5 sec. on the base station Ê The base station enters
Registration mode.
Æ Menu
Registration
Æ [Select the base station] Ê The base station is searched for
and detected
Æ
[Enter the PIN] Select Ê The handset is registered
Deregistering a handset
Æ Menu BSSettings TerminateHS
Æ [Enter the PIN] OK
Æ [Select the handset]
Selecting a base station
Æ Menu HSSettings SelectBase
Æ [Select a base station]
Additional telephone functions
As soon as several handsets are registered on the base station,
they can be used for internal calls, brokering, transferring calls and
three-way conference calls.
Internal calls
Æ
Æ [Enter the handset number] Ê Handset is called
Transferring calls to another handset / Holding a call
During a call:
Æ
Æ [Enter the handset number] Ê Handset is called; initial call
is put on hold
Æ Other handset takes the call Ê You can converse with the other
person
Æ End the call to transfer the initial call to the person called or let
the person called end the call to resume the initial call.
Conference call
During a call:
Æ
Æ [Enter the handset number] Ê Handset is called; initial call
is put on hold
Æ Other handset takes the call Ê You can converse with the other
person
Æ ÊThree-way conference is established
Technical properties
Technical data
Feature Value
Standard
- DECT (1.8 / 1.9 G); GAP
Frequency range - 1.88 ~ 1.90 GHz
Dimensions
(W x H x D)
- Base station
140 x 130 x 62 mm
- Handset
185 x 55 x 32 mm
Power supply
- Base station: 7.3 V, 0.3 A
Handset batteries
- 3 x NiMH 1.2 V, 0.6 A Type AAA
Permissible operat
ing temperatures
- 0 °C - 40 °C
Permissible relative
humidity
- 0% - 90%
All Rights Reserved!
Power adapter plug
Your mobile phone is equipped with an energy-efficient power
adapter plug P12-075150 (input 100 ~ 240V
AC
, output 7,5V
DC
,
1,5A). The zero load is approx. 0,3W. The average efficiency is
approx. 70,4%. The power consumption while charging the mobile
phone is approx. 1,71W..
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest
production methods. The implementation of carefully chosen
materials and highly developed technologies ensure trouble-free
functioning and a long service life. The terms of guarantee do not
apply when a device malfunction was caused by the mobile
telecommunications network operator/provider. The terms of
guarantee do not apply to the batteries or power packs used in the
products. The period of guarantee is 24 months from the date of
purchase.
All deficiencies related to material or manufacturing errors within
the period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following
tampering by the purchaser or third parties. Damage caused as the
result of improper handling or operation, normal wear and tear,
incorrect positioning or storage, improper connection or installation
or Acts of God and other external influences are excluded from the
terms of guarantee. In the case of complaints, we reserve the right
to repair defective parts, replace them or replace the entire device.
Replaced parts or devices become our property. Rights to
compensation in the case of damage are excluded where there is
no evidence of intent or gross negligence by the manufacturer.
If your device shows signs of defect during the period of guarantee,
please return it to the sales outlet in which you purchased the
SWITEL device together with the purchase receipt. All claims under
the terms of guarantee in accordance with this agreement can only
be asserted at the sales outlet. No claims under the terms of
guarantee can be asserted after a period of two years from the
date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection
point provided by your local public waste authorities (e.g.
recycling centre). According to laws on the disposal of
electronic and electrical devices, owners are obliged to dispose of
old electronic and electrical devices in a separate waste
container. The adjacent symbol indicates that the device must not
be disposed of in normal domestic waste!
You are legally obliged to dispose of power packs and
batteries at the point-of-sale or in the corresponding
containers provided at collection points by the public waste
authorities. Disposal is free of charge. The symbols indicate
that the batteries must not be disposed of in normal
domestic waste and that they must be brought to collection
points provided by local public waste authorities.
Packaging materials must be disposed of according to local
regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the EU
directive 1999/5/EC concerning radio equipment and
telecommunications terminal equipment and the mutual recognition
of their conformity. Conformity with the above mentioned directive
is confirmed by the CE mark on the device. To view the complete
Declaration of Conformity, please refer to the free download
available on our web site at www.switel.com
.
