687879
18
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
19
20
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the P button. This signals to the caller that you have ended trans-
mission.
Selecting a channel
M Activate Settings mode
+ or ,, P Select the channel and confirm it
Channel Frequency (MHz) Channel Frequency (MHz)
1 446.00625 5 446.05625
2 446.01875 6 446.06875
3 446.03125 7 446.08125
4 446.04375 8 446.09375
Searching for a channel
Signals are searched for in the eight channels in a continuous cycle. SCAN appears in the display. If an active channel
is detected, the channel search stops. Press the P button to enable radio communication.
Starting channel search
3 sec
SCAN
Start the channel search
Resuming search for a channel
+ or , Resume the channel search
Stopping channel search
M Stop the channel search
Transmit ringing tone
The ringing tones indicate to other subscribers that you want to talk to them. A condition for this is that the other sub-
scribers are using the same channel.
C Send the ringing tone
Monitor function
The Monitor function enables the search for weak signals on the channel currently set. If you receive an external signal,
switch to a free channel. Always communicate with other subscribers on a free channel to prevent interference.
M and + Start monitoring the channel
M End monitoring
Key lock
The key lock function prevents inadvertent modification of settings. When the key lock function is activated, the
icon appears in the display.
Activating
M and , Activate the key lock
Deactivating
M and , Deactivate the key lock
Setting the transmission power
The device is equipped with 2 transmission power options,
HI (= high) and LO (= low). The corresponding icon appears in the display.
2 x M Activate the programming mode
+ oder ,, P Select HI or LO and confirm
5 In Case of Problems
Service hotline
Should problems arise with the walkie−talkies, please refer to the following information first. In the case of technical
problems, please contact our hotline within Switzerland under tel. 0900 00 1675 (cost with Swisscom at time of going to
print: CHF 2.00/min). In the case of claims under the terms of guarantee, contact your sales outlet. There is a 2 year
period of guarantee.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Switel WTE017 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info