Bedienungsanleitung Sygonix 1528595 (Seite 6 von 6) (Deutsch, Englisch)

738518

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Countdown Mode

In the countdown mode, a time of maximal 99 hours, 59 minutes, 59 seconds can be set.

Depending on the operating mode of the weekly switch timer, the device is switched off or on

after the timer has counted down.

Operating mode „ON“ or „AUTO ON“ (socket/appliance is switch on):

The connected device is switched off after the timer has counted down

Operating mode „OFF“ or „AUTO OFF“ (socket/device is switched off):

The connected device is switched on after the timer has counted down

When the countdown mode was started, all automatic switching programmes are deactivated

for the duration of the countdown! That means that the device is not switched on or of at the

times and weekdays programmed in the programme group until the timer has counted down.

Setting the timer and start of the countdown timer:

• From the time display, press the „MENU“ button 2x until the symbol „CTD“ appears on the

bottom right and the hours of the timer ash „0:00:00“.

• Set the hours of the countdown timer with the „+1“ or „-1“ button (keep the respective button

pressed down for quick setting).

Press the „OK“ button briey to conrm.

• The minutes of the countdown timer start ashing; set the minutes with the „+1“ or „-1“ button

(keep the respective button pressed down for quick setting).

Press the „OK“ button briey to conrm.

• The seconds of the countdown timer start ashing; set the seconds with the „+1“ or „-1“ button

(keep the respective button pressed down for quick setting).

• The countdown timer is started by pressing the „OK“ button briey.

• When the timer has counted down (at 0:00:00), the front socket and the device connected to

it is switched on or off.

When the weekly switch timer is in „ON“ or „AUTO ON“ mode (socket/appliance

is switched on), the connected appliance will be switched off when the timer has

counted down.

When the weekly switch timer is in „OFF“ or „AUTO OFF“ mode (socket/device is

switched off), the connected device is switched on when the timer has counted

down.

Early termination of the countdown timer:

• If the countdown timer is to be terminated early, press the „MENU“ button several times until

the timer is shown on the display.

When the weekly switch timer is on the display of time mode or the programming of

the switching times, the countdown timer cannot be reset!

• Then press the „RCL“ button briey.

The countdown timer is then reset to „0:00:00“, the hours of the timer ash again (you can

now set a new time and restart the countdown timer as described above).

• Press the „MENU“ button briey to leave the setting mode and to return to the time display.

Alternatively, do not press any button for 2 minutes.

This deactivates the countdown timer and the weekly switch timer continues with its normal

switching program.

Random function

With the random function, the set switch on/off times are delayed by 4 to 32 minutes.

The random function can only be used for the switching times of the programme

groups, but not for the countdown timer.

To turn the random function on or off, press the „-1“ button briey.

When the random function is turned on „RND“ is ashing on the bottom right on the display.

Reset

In order to reset the weekday switch timer to the factory settings and to delete all programming,

keep the countersunk „RST“ button pressed for several seconds. All display segments are

shown on the display, then the weekday switch timer is ready for operation.

Please note:

All settings and programming are lost upon reset!

Activating the lighting of the LC display/night light function

With the switch „ “ the lighting of the display can be switched on or off.

It can also be used as night light due to its large size and brightness.

Care and Cleaning

Before cleaning the product, disconnect the appliance from the weekly switch timer. Discon-

nect then the weekly switch timer from the power supply by pulling it out of the mains socket.

Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these

could damage the housing or even impair operation.

Use a dry, lint-free cloth to clean the product.

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Dispose of an unserviceable product in accordance with the relevant statu-

tory regulations.

Technical Data

Operating voltage .................................. 230 V/AC, 50 Hz

Connection power .................................. resistive load: max. 3680 W (230 V/AC, 16 A)

............................................................... inductive load: max. 460 W (230 V/AC, 2 A)

Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.

Powered devices with inductive load are, e.g., engines, control gears, conventional

transformers, energy-saving bulbs, etc.

Protection type ....................................... IP20

Switch type ............................................ Relay (single-pole)

Socket with child protection ................... yes

Switching times per day ......................... 16 On-/Off programme

Shortest switching duration ................... 1 min

Countdown timer period ........................ 1 min to max. 99 h, 59 min, 59 s

Data retention ........................................ with an internal NiMH battery (max. approx. 6 months

with fully charged battery)

Ambient conditions ................................ temperature 0 °C to +40 °C, air humidity 0% to 95%

relative, non-condensing

Dimensions ............................................ 133 x 70 x 80 mm (L x W x H, including plug)

Weight ................................................... 270 g

Sygonix 1528595 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info