Bedienungsanleitung Tamron SP 24-70mm F 2.8 Di VC USD

616806

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

• VC can be used in AF or MF mode.

• For further details, please read the instruction manual of your camera.

ZOOMING (Ref. Fig. 1 & 2)

• Rotate the zooming ring (9) of the lens while viewing through the camera’s

viewfinder and compose your image at the chosen focal length.

ZOOM LOCK SWITCH (Ref. Fig 1, 3 & 4)

Zoom lock switch mechanism prevents lens barrels from extending toward long focal

length by their own weight while hanging from shoulders. Activate the switch at 24mm

setting to stop the lens barrels from rotating and extending.

How to activate the zoom lock switch mechanism

1. Locking:

Set the lens to the 24mm position. Move the switch (11) toward the

camera, until the index lines align with each other. The lens barrel is now locked

in position and does not rotate or extend by its own weight.

2. Releasing

: Push the switch (11) away from the camera. The lens barrel is now

free to rotate and extend for zooming.

• The zoom lock switch (11) cannot be activated unless the lens is set to the 24mm

position. Do not force the lock switch or try to rotate the lens barrel while locked.

• The zoom lock mechanism is made to prevent the lens barrel from extending while

carried around on the shoulder. The lens may change its focal length by its own

weight during a long exposure if the lens is used at a high upward or downward

angle with a focal length other than 24mm.

• The lens can be used at 24mm setting for picture taking even when locked by the

switch.

LENS HOOD (Ref. Figs. 1, 9 & 11)

A bayonet-type lens hood is provided as standard equipment. We recommend shooting

with the hood attached whenever possible as the lens hood eliminates stray light, which is

harmful to the picture. However, please be aware of the precautions stated in the next

section when your camera is equipped with a built-in flash.

Attaching the Lens Hood (Ref. Fig 9 & 10)

Align Hood attaching alignment mark (2) on the hood with the corresponding index mark

(5) or the top of the index line of the distance scale of the lens. Press the hood lightly onto

the hood attaching bayonet ring (Fig. 9) and then rotate it clockwise to secure. The lens

hood will be secure when the mark “TAMRON O” is at the top (Fig. 10). When attaching

the lens hood, hold the focus and zoom control rings, so they are not rotated

unintentionally.

• Pay particular attention to align the hood attaching indexes when using zoom

lenses including wide-angle settings. Improper attachment of a hood on a wide-

angle zoom lens may cause large shadowed areas in your pictures.

Stowing lens hood on the lens (Ref. Fig 11)

Reverse the lens hood. Point the lens toward the opening, and then align the hood

attaching index on the lens with the “TAMRON O” alignment on the hood. (3)

Turn the hood clockwise until the alignment mark is at the top to set it. (Fig. 11)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tamron SP 24-70mm F 2.8 Di VC USD - A007 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info