Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
EXEO AMP
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    EXEO AMP



  • Page 2

    CONTENTS
    SAFETY INFORMATION

    1

    IMPORTANT SAFETY INSTRUCTIONS

    2

    ACCESSORIES

    4

    CONNECTIONS

    5

    REMOTE CONTROL INFORMATION

    7

    FRONT PANEL INFORMATION

    9

    REAR PANEL INFORMATION

    10

    OPERATION AND FUNCTIONS

    11

    TROUBLESHOOTING GUIDE

    13

    SPECIFICATIONS

    14



  • Page 3

    SAFETY INFORMATION

    Caution:
    -

    To reduce the risk of electric shock, do not remove Cover (or back)

    -

    No user-serviceable parts inside.

    -

    Refer servicing to qualified service personnel.

    This lightning flash with arrowhead symbol, within an equilateral
    triangle is intended to alert the user to the presence of uninstalled
    “dangerous voltage” within the product’s enclosure that may be of
    sufficient magnitude to constitute a risk of electric shock to persons.

    The exclamation point within an equilateral triangle is intended to alert
    the user to the presence of important operating and maintenance
    (servicing) instructions in the literature accompanying the appliance.

    The symbol on this product indicates that it is of CLASS II
    (double insulated) construction.

    1



  • Page 4

    IMPORTANT SAFETY INSTRUCTIONS
    CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
    1.

    READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before the product is operated.
    Follow all operation instructions within this manual.

    2.

    RETAIN INSTRUCTIONS: The safety and operation instructions should be retained for future reference.

    3.

    HEED WARNINGS: Comply with all warnings on the product and in the operation instructions.

    4.

    CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
    damp cloth for cleaning.

    5.

    GROUNDING or POLARIZATION: This product may be equipped with a polarized alternating current line plug (a plug having
    one pin wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
    insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician since it is likely
    you have an out of safe wall socket. Never force the plug into the socket.

    6.

    OVERLOADING: Do not overload wall outlets or extension cords as this can result in the risk of
    fire or electric shock. Overloaded AC outlets, extension cords, frayed power cables, damaged
    or cracked wire insulation, and broken plugs are dangerous. They may result in electric shock
    or fire hazard. Periodically examine the power cable - if its appearance indicates damage or
    deteriorated receptacles have it replaced by your service technician.

    7.

    POWER SOURCES: This product should be operated only from the type of power source indicated on the rear panel label. If
    you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products
    intend to be operated from battery power, or other sources, refer to the operation instructions.

    8.

    ACCESSORIES: Do not place this product on an unstable surface or support. The product may fall,
    causing serious injury to a child or adult as well as serious damage to the product. Any mounting of
    the product should follow the manufacture’s instructions and use a mounting accessory
    recommended by the manufacturer. A product and cart combination should be moved with care.
    Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
    overturn.

    9.

    OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna
    or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. The example
    below is for reference only. Correct grounding should always be installed by an electrician.
    ANTENNA
    LEAD IN
    WIRE

    GROUND
    CL AMP

    ANTENNA
    DISCHARGE UNIT
    (NEC SECTION 810-2 1)
    ELECTRIC
    SERVICE
    EQUIPMENT

    GROUNDING CONDUCTORS
    (NE C S ECTION 810 -21)

    GROUND CL AMPS
    POWER SERVICE GROUNDING
    ELECTRODE SYSTEM
    (NEC ART 2 50.PART H)

    10. POWER-CORD PROTECTION: The power supply cables should be routed so that they are not likely to be walked on or pinched
    by items placed upon or against them, paying particular attention to cables at plugs and the point where they exit from the
    product. The mains plug of the power supply cord shall remain readily operable.
    11. ATTACHMENTS: Do not use unauthorized attachments as they may cause faults with the unit.

    2



  • Page 5

    IMPORTANT SAFETY INSTRUCTIONS
    12. CONDITIONS REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel
    under the following conditions.
    a)

    If the unit exhibits sudden unusual operation or unusual display characteristics.

    b)

    If liquid has been spilled, or objects have fallen into the product.

    c)

    If the product has been exposed to rain or water.

    d)

    If the product does not operate normally by following the operation instructions, adjusting only those controls that are
    covered by the operation instructions. (NOTE: improper adjustment of other controls may result in damage and will often
    require extensive work by a qualified technician to restore the product to its normal operation).

    e)

    If the product has been dropped or damaged in any way.

    f)

    If the product exhibits a distinct change in performance.

    13. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
    voltage and may damage precision components. Refer all servicing to qualified service personnel.
    14. LIGHTNING: For added protection during a lightning storm, or when it is left unattended and unused for long period of time,
    unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to
    lightning and power line .
    15. REPLACEMENT PARTS: Should replacement parts be required, have the service technician verify that the replacement parts
    he uses have the same safety characteristics as the original parts. Use of unauthorized replacements parts can cause fire or
    electric shock.
    16. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks
    recommended by the manufacturer to determine that the product is in a safe operating condition.
    17. HEAT DISPERSAL: Leave at least 10 cm of space between the top, back and sides of the unit and the wall or other electrical
    components.
    18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
    on the apparatus.
    19. NOTES ON USE

    Keep the set free from moisture.
    water,and dust.

    Do not let foreign objects in the set.

    Avoid high temperatures
    Allow for sufficient heat dispersion
    when installed on a rack.

    Unplug the power cord when not
    using the set for long periods of
    time

    Handle the power cord carefully.
    Hold the plug when unplugging the
    cord.

    Do not let insecticides,benzene,and
    thinner come in contact with the set.

    * (For sets with ventilation holes)
    Do not obstruct the ventilation
    holes

    Never disassemble or modify the set
    in any way.

    3



  • Page 6

    ACCESSORIES
    You should find the following accessories included:
    1. Mains cord
    2. RCA cord
    3. Remote control + batteries AAA x 2
    4. Operator’s Manual.

    1

    2

    3

    4

    4



  • Page 7

    CONNECTIONS
    Connection precautions

    SUB OUT terminals

    When connecting, either disconnect the power plug from

    These terminals are used to connect to an active subwoofer.

    the power outlet or turn off the unit’s power using the

    Use pin-plug cords to connect the terminals to the INPUT

    POWER switch (if any).

    terminals on the subwoofer.

    Check the left and right channels and connect properly
    (Left to L and Right to R).
    Insert the plugs securely. Improper connection can lead to
    generation of noise.

    E.g. compact disc player

    ACTIVE
    SUBWOOFER
    (NOT INCLUDED)

    Connect the CD terminals to the OUTPUT terminals on the
    compact disc player using the pin-plug cord.
    Speaker systems

    To avoid damaging the speakers with a sudden high-level
    signal, be sure to switch the power off before connecting the
    OUTPUT

    speakers.
    Check the impedance of your speakers.
    Connect speaker with an impedance of 4 ohms or more.
    The amplifier’s red speaker terminals are the + (positive)
    terminals and the black terminals are the – (negative)
    terminals.
    The + side of the speaker cable is marked to make it
    distinguishable from the – side of the cable. Connect this
    Recording connections Connect the REC OUT terminals to

    marked side to the red + terminals and the unmarked side

    the input (LINE IN) terminals on the tape deck using the

    is the black terminal.

    pin-plug cord.

    Prepare the speaker cords for connection by stripping off
    approximately 10 mm or less (no more as this could cause
    a short-circuit) of the outer insulation. Twist the wires

    LI NE
    ( I N) REC

    PLAY( OUT)

    tightly together so that they are not straggly.

    1
    A

    B

    2

    3

    5

    1.

    Unscrew the knob

    2.

    Insert the speaker cable.

    3.

    Tighten the knob and secure the cable.



  • Page 8

    CONNECTIONS
    PHONO
    Connect the turntable’s output cord L (white) plug to the L PHONO terminal and the R (red) plug to the R PHONO terminal.
    If your turntable is equipped with a grounding cable, connect it to the unit’s GND terminal. But disconnect it if you notice increased
    humming.

    AUDI O

    AUX1 terminals
    This terminal have an electrical performance which is equivalent to that of the CD terminals which means that it can be used as the
    audio output terminals for a line level source. Connect this terminal to the OUTPUT terminal on the component using the pin-plug
    cord.
    AUX2 terminal
    This terminal has an increased sensitivity (x4) compared to the other line level inputs.
    Headphone terminal
    For connection of a pair of headphones.

    6



  • Page 9

    REMOTE CONTROL INFORMATION
    By using the provided remote control unit, the receiver can
    be controlled from your listening position. To use the remote
    control unit, point it at the REMOTE SENSOR window of the
    receiver.

    REMOTE CONTROL OPERATION RANGE
    Use the remote control unit within a range of about 7
    meters (23 feet) and the angles of up to 30 degrees aiming
    at the remote sensor.

    Notes:

    BATTERY INSTALLATION

    - Even if the remote control unit is operated within the
    effective range, remote control operation may be impossible
    if there are any obstacles between the unit and the remote
    control.
    - If the remote control unit is operated near other appliance
    which generate infrared rays, or if other remote control
    devices using infrared rays are used near the unit, it may
    operate incorrectly.
    Precautions concerning batteries
    -Be sure to insert the batteries with correct positive+ and
    negative – polarities.
    - Use batteries of the same type. Never use different types of
    batteries together.
    - Rechargeable and non-rechargeable batteries can be used.
    Refer to the precautions on their labels.
    - When the remote control unit is not to be used for a long
    time (more than a month), remove the batteries from the
    remote control unit to prevent them from leaking. If they leak,

    1.

    Remove the battery compartment cover.

    2.

    Insert two “AAA” dry batteries.

    wipe away the liquid inside the battery compartment and

    Make sure that the batteries are inserted with their

    replace the batteries with new ones.
    -

    positive “+” and negative “-” poles positioned correctly.

    Do not heat or disassemble batteries and never dispose
    of old batteries by throwing them in a fire.

    3.

    Close the cover until it clicks.

    If the distance required between the remote control unit and
    main unit decreases, the batteries are exhausted. In this
    case, replace the batteries with new one.

    7



  • Page 10

    REMOTE CONTROL INFORMATION

    1

    2

    3
    4

    6
    5

    6. Memory
    Does not apply.
    7. Number Keys
    Does not apply.
    8. DIM
    Press this button to toggle the brightness between: 25%, 50%,
    75% & 100%.
    9. MODE
    Does not apply.
    10. Menu
    Press the AMP button and then press the Menu button to enter
    the menu.
    11. Cursor keys◄►▲▼
    12. Enter
    To confirm selection.
    13. Tuning +/Does not apply.
    14. Volume+/To increase or decrease the volume.
    15. Mute
    Press this button to mute the audio, press it again to cancel the
    mute function.
    16.
    Does not apply.
    17.
    Does not apply.
    18.
    Does not apply.
    19.
    Does not apply.
    20. CDP
    Press this button to activate the CDP input (also switches on
    an EXEO CDP from Standby, and switches off any other EXEO
    source).
    21. NET
    Press this button to activate the NET input (also switches on an
    EXEO NET from Standby, and switches off any other EXEO
    source).
    22. DAB
    Press this button to activate the DAB input.
    23. AUX1
    Press this button to active the AUX1 input.
    24. AUX2
    Press this button to active the AUX2 input.
    25. Phono
    Press this button to active the PHONO input.
    26. AMP
    Press this button to activate the EXEO AMP from Standby.
    27. Speaker A/B
    Press this button to choose between SPEAKER A, SPEAKER
    B, SPEAKER A+B and SPEAKER OFF.

    7

    8
    9

    10

    11
    12

    13

    14

    15
    16
    17
    20
    21

    19
    18
    23
    22

    24
    25

    27
    26

    1. System Off
    Press this key to turn off the EXEO AMP and any other EXEO
    product.
    2.
    Does not apply.
    3. Autotune
    Does not apply.
    4. Info
    Does not apply.
    5. ST/Mono
    Does not apply.

    8



  • Page 11

    FRONT PANEL INFORMATION
    5

    1

    1.

    2

    3

    4

    7

    Standby/On

    Press it to turn on the unit and press it again to turn it off.
    2.

    LED Indicator

    Is OFF when the amplifier is turned on. It is red when the amplifier is in standby mode.
    3.

    Input

    Rotate this knob clockwise or counterclockwise to choose the input source between: CDP, NET, DAB, AUX1, AUX2, PHONO. Press
    it to confirm the selection.
    Press and hold this button to enter the menu for the below settings: EQ, SPEAKER, LOUDNESS, DISPLAY, HP FILTER, PHONO.
    4.

    Display

    5.

    Volume knob

    To increase or decrease the volume. Changing volume setting un-mutes the system.
    6.

    AUX2

    3.5mm mini-jack input.
    7.

    Headphone

    6.5mm jack stereo headphone output.

    9



  • Page 12

    REAR PANEL INFORMATION

    1

    2

    3

    4

    6

    7

    8

    9

    1.

    PHONO: For connection of a turn table (Note: Additional ground terminal available above inputs)

    2.

    CDP: For connection of a CD player e.g. EXEO CDP

    3.

    NET: For connection of a NET tuner e.g. EXEO NET

    4.

    DAB: For connection of e.g. a DAB tuner

    5.

    AUX1 : For connection of a line level source

    6.

    PRE OUT: For connection of e.g. a external power amplifier

    7.

    REC OUT: For connection of e.g. an external tape deck.

    8.

    SUB OUT: For connection of e.g. an active subwoofer

    9.

    SPEAKER OUT: For connection of loudspeakers
    Note: The speaker impedance must be 4-8 Ohms. For optimal sound quality there must be a proper connection between the
    speaker terminal and the amplifier terminal. The cable ends must not be frayed, to avoid that they come into contact with each
    other, or the cabinet back panel.

    10. AC MAINS INPUT: For connection of mains voltage. Make sure that the plug is correctly inserted, and that the voltage
    corresponds to the text printed on the back panel of the cabinet.

    Note: All audio inputs and outputs are analogue.

    10



  • Page 13

    OPERATION AND FUNCTION
    ON, Off and Standby
    1. Turn on the unit by pressing the Standby/ON button on the front panel or the AMP button on the remote control.
    2. If you wish to turn off the unit to avoid any power consumption, you must remove the power cord.
    Selecting an Input Source
    You can choose an input source by the left hand side knob, and press the knob to select. In addition the remote has dedicated input
    selection.
    Volume Control
    On the right hand side knob the volume can be adjusted. Press it to mute or un-mute the system. Changing volume un-mutes the
    system.
    Menu Layout
    The menu is accessed by pressing and holding the left hand side knob, or by pressing AMP and then MENU on the remote.
    Use the arrow keys and the ENTER key of the remote, or the left hand side knob on the front panel to operate the menu.

    EQ – Bass Control
    The amplifier features a bass control with an adjustment of +/-10dB.
    EQ - Treble Control
    The amplifier features a treble control with an adjustment of +/-10dB.
    EQ - Balance Control
    The amplifier features a balance control with of -80dB attenuation for each speaker output.
    EQ – Direct Out
    When this function is on the Bass, Treble and Balance is bypassed. If Direct Out is set to off again, the EXEO AMP will remember
    the Bass, Treble and Balance settings.
    Speaker Out
    A, B, A+B and Off can be selected. In case Off is selected, it is continuously stated in the display.
    Loudness
    Loudness bypass any EQ function, as it uses the EQ to generate the loudness curve.
    Display - Brightness
    Levels of 25-50-75 and 100% can be selected. 75% is default. The DIM button on the remote toggles the levels.
    Display – Time Out
    Time limits of 5 and 20secs can be selected and off. Time Out means the display switches off, if no actions are taken with the time
    limit.
    11



  • Page 14

    OPERATION AND FUNCTION
    HP Filter
    A highpass filter can be set on and off, to match the system with a active subwoofer. The corner frequency is 80Hz and it has a 12dB
    slope.
    PHONO
    The phono input can be set for MM and MC cartridges, the gain is 40 and 60dB respectively.
    Factory Reset
    The function brings back the unit to default settings.
    Firmware
    This function shows the firmware version.

    12



  • Page 15

    TROUBLESHOOTING
    PROBLEM

    CAUSE/REMEDY

    No power when the unit is turn on

    - Switch on the current at the mains outlet socket
    - Check that the plug has been correctly inserted in the socket
    - The internal fuse has blown and must be replaced by a qualified service technician
    - The power cord has been damaged and must replaced

    No Sound

    - The unit has not been turned on
    - The volume control is set at minimum or muted
    - The speaker cables have not been correctly connected
    - A wrong input source has been selected
    - Input source has been connected
    - Speaker setting is set to off

    There is sound in one channel only

    - The balance control is not correctly adjusted
    - The audio input cables have been incorrectly connected or damaged
    - The input source is defective
    - The speaker cable have been incorrectly connected or damaged
    - The speaker is defective

    High buzzing

    - The audio input cables have been incorrectly connected or damaged
    - The ground cable for the record player has not been connected
    - The turn table pick-up is defective

    Weak bass and poor stereo perspective

    - The speaker connection is out of phase. Check that the positive
    and negative poles have been correctly connected, both at the back of
    the amplifier and at the back of the speaker

    Distortion of sound

    - Bass and treble control are too high in relation to speaker specifications
    - The volume is set too high

    The display does not display any

    - The amplifier is defective and should be serviced by a qualified technician

    information

    - Time out for the display is chosen in the menu

    The unit does not switch between inputs

    - The amplifier is defective and should be serviced by a qualified technician

    “ERROR” is displayed on the display

    - The amplifier is defective and should be serviced by a qualified technician

    13



  • Page 16

    SPECIFICATIONS
    Parameter

    Value

    Note

    Power
    Standby Power Consumption
    Power Supply Rating

    0.73Wrms
    300Wrms

    Audio - Connectors
    Line Level Inputs Connectors
    3.5mm Line Level Inputs Connector
    Line Level Outputs Connectors
    1/4 Headphone Output Connectors
    Binding Post

    RCA (Phono), gold plated
    3.5mm mini-jack, tin-plated
    RCA (Phono), gold plated
    1/4" (6.2mm) jack, tin-plated
    Banana plug & stripped wire

    Case = Gnd, Tip = Signal (CDP, NET, DAB, AUX1)
    Case = Gnd, Ring = R, Tip = L (AUX2)
    Case = Gnd, Tip = Signal (PRE, REC, SUB)
    Case = Gnd, Ring = R, Tip = L (HEADPHONE)
    Positive terminal = red, Negetive terminal = black

    Audio - Line levels
    Input maximum swing
    Output max swing
    Frequency Response L/R - Pre Out
    Frequency Response L/R - Rec Out
    Signal-to-Noise Ratio - Pre Out
    Signal-to-Noise Ratio - Rec Out
    Dynamic Range - Pre Out
    Dynamic Range - Rec Out
    Distortion THD+N - Pre Out
    Distortion THD - Pre Out
    Distortion THD+N - Rec Out
    Distortion THD - Rec Out
    Crosstalk - Pre Out
    Crosstalk - Rec Out

    4.2Vrms
    9.5Vrms
    +/- 0.05dB
    +/- 0.05dB
    105dBA
    118dBA
    104dBA
    117dBA
    -90dB
    -91dB
    -101dB
    -104dB
    -69dB
    -95dB

    20-20KHz
    20-20KHz
    0V input, A-wgt
    0V input, A-wgt
    -60dB, 1KHz, A-wgt
    -60dB, 1KHz, A-wgt
    1KHz, AES-17, A-wgt, 2Vrms, volume=0dB
    1KHz, AES-17, A-wgt, 2Vrms, volume=0dB
    1KHz, AES-17, A-wgt, 2Vrms
    1KHz, AES-17, A-wgt, 2Vrms
    125-16KHz, AES-17, A-wgt
    125-16KHz, AES-17, A-wgt

    Audio - Phono
    MM Gain
    MC Gain
    Frequency Response L/R - Rec Out
    Signal-to-Noise Ratio - Rec Out
    Dynamic Range - Rec Out
    Distortion THD+N - Rec Out
    Distortion THD - Rec Out
    Crosstalk - Rec Out

    40dB
    60dB
    +/- 1dB
    90dBA / 70dB
    90dBA / 60dB
    -90dB / -70dB
    -100dB / -80dB
    -75dB

    (i.e. max. input swing = 42mVrms)
    (i.e. max. input swing = 4.2mVrms)
    20-20KHz (inverse RIAA curve used)
    0V input, A-wgt, [MM / MC]
    -60dB, 1KHz, A-wgt [MM / MC]
    1KHz, AES-17, A-wgt, 2Vrms
    1KHz, AES-17, A-wgt, 2Vrms
    125-16KHz, A-wgt

    Audio - Amplifier
    Po@8R
    Po@4R
    Frequency Response L/R @8R
    Frequency Response L/R @4R
    Signal-to-Noise Ratio
    Dynamic Range
    Distortion THD+N
    Distortion THD
    Crosstalk

    >60W
    >100W
    +/- 1dB
    +/- 1dB
    101dBA
    100dBA
    -85dB
    -85dB
    -70dB

    1% THD, incl. 20KHz passive lowpass filter
    1% THD, incl. 20KHz passive lowpass filter
    20-20KHz, Fo max. 33KHz
    20-20KHz, Fo max. 27KHz
    0V input, A-wgt
    -60dB, 1KHz, A-wgt
    1KHz, AES-17, A-wgt, 1/8 rated power
    1KHz, AES-17, A-wgt, 1/8 rated power
    1KHz, AES-17, A-wgt, 1/8 rated power

    14






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tangent Exeo Amp wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Tangent Exeo Amp in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,46 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info