Bedienungsanleitung Tanita BC-1100F (Seite 3 von 7) (Englisch)

545131

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Preparations before use

Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied

AA-batteries as indicated.

Note: Be sure that the polarity of the batteries is set properly. If the batteries are

incorrectly positioned the fluid may leak and damage floors. If you do not intend

to use this unit for a long period of time, it is advisable to remove the batteries

before storage.

Please note that the included batteries from the factory may have decreased energy levels

over time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to

ensure safe and accurate measurement.

Note : To avoid possible injury, do not step on the edge of the platform.

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.

To keep the unit in the best condition, follow these instructions carefully:

• Do not attempt to disassemble the measuring platform.

• Store the unit horizontally.

• Avoid excessive impact or vibration to the unit.

• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid

soaps.

• Do not step on the platform when wet.

• Do not drop any objects onto the platform.

• Do not use this scale while operating transmitters (such as a cell phone) as this may affect your results.

• If not in use for a prolonged period of time it is recommended that you remove the batteries.

Getting accurate readings

To ensure accuracy, readings should be taken without clothing and

under consistent conditions of hydration. If you do not undress,

always remove your socks or stockings, and be sure the soles of

your feet are clean before stepping on the measuring platform.

Be sure that your heels are correctly aligned on the measuring

platform. Don’t worry if your feet appear too large for the unit

-accurate readings can still be obtained if your toes overhang the

platform.

It is best to take readings at the same time of day. Try to wait about

three hours after rising, eating, or hard exercise before taking

measurements.

While readings taken under other conditions may not have the

same absolute values, they are accurate for determining the

percentage of change as long as the readings are taken in a

consistent manner. To monitor progress, compare weight and body

fat percentage taken under the same conditions over a period of

time.

Note : An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting

position.

Open as shown.

Direction of

the batteries.

Heels centered on

electrodes

Toes may overhang

measuring platform

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tanita BC-1100F Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info