GB GB
76
Safety Notes
(continued)
Please observe the following instructions for accurate measurement.
• Measurement may not be possible on a surface that is strongly vibrating. In such cases
transfer the equipment to a stable surface with little or no vibration.
• If the scale is moved, and the new location has a temperature difference of more than
+/- 20˚C please a
llow at least 2 hours for the temperature to adjust before using.
• While taking measurements, do not use mobile phones, microwave therapy equipment
or other types of transmitter near the scale as they may cause interference.
<Usage Conditions>
Temperature Range for Use : 5˚C - 35˚C
Relative Humidity : 30% - 80% (without condensation)
<Storage Conditions>
Temperature Range of Environment : -10˚C - +50˚C
Range of Relative Humidity : 10% - 90% (without condensation)
T
o avoid malfunctions, avoid storing the equipment where there is direct sunlight,
significant temperature changes, the risk of dampness, a large amount of dust, in
the vicinity of fires, or where there is the risk of receiving vibrations or shocks.
Instructions for Measurement
Explanation of terminology
• Max (Maximum Capacity)
This shows the maximum weight that can be measured by the scale.
[Example]
In the case of Maximum capacity 15kg, it can measure up to 15kg.
* One exceeding the weighing capacity cannot be measured.
•
e (Minimum Graduation)
This shows the amount of one scale mark. In the case of a digital display, this shows the inter-
val of the numeric value to change.
[Example]
I
n the case of Minimum Graduation 2g (0 - 6kg) 5g (0 - 15kg) the display increases and decreases.
• Extend Minimum Graduation
T
his is the amount of the scale mark that can display more finely than the Minimum
Graduation.
The display rang
e is up to 1g unit (this cannot be used for actions of transaction certification).
• Tare
The container, to
wel, blanket, etc., used when measuring weight is called “tare”.
To measure the n
et-weight after subtracting the weight of the tare is called "tare weighing."
<AC Adapter>
Model
A30930G CLASS2 (centre minus)
Input Voltage
230VAC 50Hz 65mA
Output Voltage
9VDC ± 0.45VDC
Rated Current
300mA
No Load Voltage
12VDC ± 0.6VDC
Consumption Current
50mA
Power Consumption
0.5W max
<Batteries>
Batteries (R6) 4
Consumption Current
40mA
Power Consumption
0.3W max
