Bedienungsanleitung Tanita BF684W (Seite 4 von 28) (Englisch, Französisch, Portugiesisch, Spanisch)

545050

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

To ensure accuracy, readings should be taken without clothing and under consistent

conditions of hydration. If you do not undress, always remove your socks or

stockings, and be sure the soles of your feet are clean before stepping on the

measuring platform.

Be sure that your heels are correctly aligned with the electrodes on the measuring

platform. Don’t worry if your feet appear too large for the unit accurate readings can

still be obtained if your toes overhang the platform. It is best to take readings at the

same time of day. Try to wait about three hours after rising, eating, or hard exercise

before taking measurements.

While readings taken under other conditions may not have the same absolute

values, they are accurate for determining the percentage of change as long as the

readings are taken in a consistent manner. To monitor progress, compare weight

and body fat percentage taken under the same conditions over a period of time.

Note: An accurate reading will not be

possible if the soles of your feet are

not clean, or if your knees are bent or

you are in a sitting position.

Heels centered on

electrodes

Toes may overhang

measuring platform

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.

To keep the unit in the best condition, follow these instructions carefully:

•Donotattempttodisassemblethemeasuringplatform.

•Avoidexcessiveimpactorvibrationtotheunit.

•Placetheunitinanareafreefromdirectsunlight,heatingequipment,highhumidity,orextremetemperaturechange.

•Neversubmergeinwater.Usealcoholtocleantheelectrodesandglasscleaner(appliedtoaclothfirst)tokeepthemshiny;avoid

soaps.

•Donotstepontheplatformwhenwet.

•Donotdropanyobjectsontotheplatform.

Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied AA-

batteries as indicated.

Note: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly

positioned the fluid may leak and damage floors. If you do not intend to use this

unit for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from factory may have decreased energy levels over

time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to

ensure safe and accurate measurement.

Note: Toavoidpossibleinjury,donotstepontheedgeoftheplatform.

PREPARATIONS BEFORE USE

GETTING ACCURATE READINGS

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:

•Ifyouinterruptthemeasurementprocess.Thepowerwillshutdownautomaticallywithin10to20seconds.

•dependinguponthetypeofoperation.

•Ifanextremeweightisappliedtotheplatform.

•Duringprogramming,ifyoudonottouchanyofthekeysorbuttonswithin60seconds.*

•Afteryouhavecompletedthemeasuringprocess.

*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.3).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tanita BF684W Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info