490775
8
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
8 TASCAM RC-HS20PD
3 – Preparations
Connecting to an HS-8
Use the included cable to connect the REMOTE connector
on the rear panel of this unit with the HS-8’s REMOTE
connector.
CAUTION
The REMOTE connector is not an Ethernet (LAN) connector.
Never connect a cable that is connected to a network to
this unit or an HS-8.
Always turn the HS-8 unit power OFF before connecting
or disconnecting a cable. Connecting a cable while the
power is ON could cause damage.
Attaching the ferrite core to the
HS-8 power cable
Attach the included ferrite core to the HS-8 power cable
as shown below for the stable operation of this unit.
Using the HS-8 SIGNAL GND
terminal
Depending on the operating conditions, flicker might
appear on the color display of this unit or noise might
be heard in the monitoring sound. Should this occur, use
the SIGNAL GND terminal on the rear panel of the HS-8.
(Please prepare a cable to connect to the SIGNAL GND
terminal. No cable is provided with the unit.)
Setting the HS-8
1 Make the following settings to the HS-8 unit as
necessary.
Online function
If the online function is set to Enable, this units
ON LINE key is enabled, and on line playback can
be turned ON (on line playback) or OFF (monitor
playback).
If the on line function is set to Disable, this units ON
LINE key is disabled, and sound is always output from
all the output connectors.
For details about setting the online function, see
“Enabling online functions” of “9 – Online functions” in
the HS-8 Owners Manual.
Play Mode
Set the play mode as desired.
In One Take mode, playback stops after playing a
single take. In All Take mode, all the takes in the folder
are played in succession.
For details about play mode settings, see “GENERAL
page” of “6 – Internal Settings and Operations” in the
HS-8 Owners Manual.
2 Select the folder to play.
See “Loading folders” of “5 – Projects in the HS-8
Owners Manual.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam RC-HS20PD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info