Bedienungsanleitung Team bl 3 s (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

400946

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

7 TEAM BL 3 - 090722

Assembly page 7/32

Fax +32 2 359 95 50

 The appliance is designed for the preparation of small quantities of food, which have to

be consumed rather quickly. It is not designed for the preparation of large quantities at

once.

 Do not touch the blades while the appliance is operating and do not try to block their

movement in any way.

 Do not use the appliance without any food in it.

(*)

Competent qualified electrician: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this electrician.

IMPORTANT INFORMATION

This appliance is not for professional use. You should follow the requested breaks. Failure to

follow this instruction carefully may result in damage to the motor. Please refer to the rating

label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).

The breaks should last at least 10 minutes.

ATTENTION!

Your appliance is fitted with a security device on the pouring jug allowing the functioning of

the appliance only when the jug and its lid are correctly placed on the motor base. If those

conditions are met and the appliance does not start, call your after-sales service.

MOUNTING OF THE BLENDER AND USE

 Put the pouring jug on the motor block and make sure it is correctly inserted.

 Remove the lid of the blender.

 Fill the pouring jug with the chosen ingredients.

 Close the lid.

 Plug in the appliance.

 Choose the mixing speed with the button on the motor base. Position 0 corresponds to

stopping the appliance, position 1 to a slow speed and position 2 to a fast speed.

 Position "P" (Pulse) is particular because the button has to be kept manually. This position is

generally used to crush ice in order to avoid damages on the blades, but it can also be

used to complete the mixing.

 It is also possible to add liquids or other ingredients anytime without stopping the

appliance. You only have to remove the cap which closes the feeding opening by turning

it and raising it straight up.

 Once you have finished the preparation, stop the appliance (position 0) and unplug the

appliance.

 Remove the jug from the base. Then remove the lid and pour the liquid into the desired

receptacle.

 Caution: your appliance is not designed to mix hot preparations and the glass bowl could

break otherwise. If nevertheless you wish to prepare hot drinks or soups, let the whole cool

down to a temperature lower than about 60°C (tepid preparation) before pouring it into

the glass bowl. In case the lid would come up in spite of the precautions mentioned in

section « Important safeguards », you can also empty part of the preparation and mix it in

several times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team bl 3 s Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info