Bedienungsanleitung Team KM 12 (Seite 5 von 16) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487071

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

Assembly page 5/16

Fax +32 2 359 95 50

INITIAL OPERATION

 When you use your appliance for the first time, pour fresh water into the water tank

(without coffee) and switch on the appliance.

 Once all the water has passed through, switch the appliance off and let it cool down.

When it is cold enough repeat the process with fresh water. Repeat this process twice.

PREPARATION OF COFFEE

 Open the lid of the water tank.

 Pour the desired amount of water into the water tank. Make sure not to overfill by

respecting the maximum level indicated on the water tank.

 The filter holder is removable and has a carrying handle. Put the filter holder in the

appliance, and insert a paper filter (1X4) in it. Fill the filter with the desired quantity of

ground coffee, depending on the desired strength and the number of cups (you can read

the number of cups from the water level indicator).

 Put the jug on the hotplate. This will slightly raise the filter holder, but thanks to the weight

of the filter holder, it will raise the anti-drip system as well, so that the coffee can go

through.

 Switch on the coffee maker. The switch will be illuminated, indicating that your appliance

works. Thanks to the keep warm function, your coffee is warmed up as long as the

appliance is switched on. Note that the appliance will be switched on as long as you do

not switch it off manually. We advise you not to let the appliance switched on more than

2 hours and make sure that you never let an empty jug on the appliance.

 Your appliance is equipped with an anti-drip function. When you remove the jug, an anti-

drip valve will automatically operate to stop any drops of coffee dripping onto the

hotplate. Replacement of the jug automatically opens the non-drip valve and allows

remaining coffee to filter trough into the jug. That’s why the position of the jug is very

important.

 Wait until the brewing process is finished and the filter has run empty before removing the

jug.

DESCALING AND CLEANING

 Descaling the coffee maker prolongs its life span. For descaling only use products

especially made for descaling of coffee makers.

 Never use a dishwasher to clean the jug. Just clean it in soapsuds.

 To clean the plastic parts of the appliance, use a damp, non-abrasive cloth.

PRACTICAL HINTS

When you notice that the coffee making process is longer than it should be it is probably time

to decalcify the appliance. Do not wait until the situation gets worse. The decalcifying

frequency depends on the amount of lime in water and therefore can be different from family

to family. Therefore it is important to pay attention to this.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team KM 12 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info