Bedienungsanleitung Team TKM 4 (Seite 5 von 16) (Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487591

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

Assembly page 5/16

Fax +32 2 359 95 50

INITIAL OPERATION

 For a perfect taste, carry out 2 or 3 boil-processes with fresh water (without coffee). These

boil-processes are absolutely necessary.

 Once all the water has passed through, switch the appliance off and let it cool down

during 5 minutes. Then repeat the process with fresh water.

PREPARATION OF COFFEE

 Open the lid of the water tank and pour the desired volume of water in it. The number of

cups can be read off the water level indicator. Never overfill.

 Insert filter in the filter holder and add the desired quantity of ground coffee. Replace the

filter cone, making sure it is placed correctly.

 Do never forget to close the lid of the water tank before using your coffee machine. To

switch on the machine, put the switch in position "1" and its pilot light will come on,

indicating that the appliance is working.

 When you remove the thermos flask from the appliance, a non-drip valve will

automatically operate to stop any drops of coffee dripping onto the hotplate.

Replacement of the thermos flask automatically opens the non-drip valve and allows

remaining coffee to filter trough into the thermos flask.

 Wait until the brewing process is finished and the filter has run empty.

 Practical hints:

 When the water tank is empty, wait a few additional minutes, as some water might

still drip out of the filter.

 To keep the coffee warm, remove the flask from the appliance, as then the cap will

close itself hermetically.

AUTOMATIC CUT OFF MECHANISM

 Your appliance is equipped with an automatic cut-off mechanism. Once the coffee has

passed through, this mechanism cuts off the appliance without putting the switch in off

position. This mechanism should be reset manually. To do so, simply press the reset button

situated next the switch.

 If the pilot light of your switch does not come on when the switch is in normal ON position

and marked by number 1, press the reset button to allow your appliance to be switched

on.

 This mechanism is important as it allows prolonging the life span of your coffee maker by

limiting its switch ON to 1 operation cycle. Your thermos flask keeps the coffee hot without

having to warm it up additionally.

DECALCIFICATION AND CLEANING

 Decalcifying the coffee maker prolongs its life span. For decalcification only use products

especially made for decalcification of coffee makers.

 Never use a dishwasher to clean any part of your coffee maker but clean the removable

parts in soapy water and rinse them with clear water.

 For the other parts of the appliance, use a soft damp cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team TKM 4 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info