Handleiding Internet van Ziggo 63
WEP Encryption
You can choose 64-bit or 128-bit according to your needs. If you choose
Disabled, the Network Keys will not be shown on this page. If selected, the data
is encrypted using the key before being transmitted. e.g., If you set 128-bit in this
field, then the receiving station must be set to use the 128 Bit Encryption, and
have the same Key value too. Otherwise, it will not be able to decrypt the data.
You need to connect one end of the Ethernet cable to the Ethernet port on the
back of your computer, and the other end to the ETHERNET port on the
Wireless Voice Gateway.
If you select WEP (64-bit or 128-bit), you can adjust the following settings.
Shared Key
Authentication
Decide whether to set the shared key Optional or
Required by selecting from the drop-down menu
Network Key 1 to 4 The system allows you to enter four sets of the
WEP key. For 64-bit WEP mode, the key length is
5 characters or 10 hexadecimal digits. As for 128-
bit WEP mode, the key length is 13 characters or
26 hexadecimal digits
Current Network Key Select one set of the network key (from 1 to 4) as
the default one.
Passphrase You can enter ASCII codes into this field. The range
is from 8 characters to 64 characters. For ASCII
characters, you can key in 63 characters in this
field. If you want to key in 64 characters, only
hexadecimal characters can be used.
Generate WEP Keys Click this button to generate the Passphrase.
Apply After proper configuration, click Apply to invoke
the settings.
