Bedienungsanleitung Technics SCEN35DB (Seite 5 von 12) (Englisch)

612811

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RQTV0168

DAB

➡

Page 2 for the position of remote control buttons.

DAB stands for digital audio broadcasting. It is a new form of radio that is broadcast

digitally. Unlike regular analogue broadcasting, digital radio deteriorates less, and is

thus able to provide quality sound close to that of a disc.

DAB structure

Bands

There are two types of DAB bands, “BAND III” (Receivable in this unit) and “L BAND”

(Not broadcast in the United Kingdom, and not receivable on this unit).

Frequencies

There are 41 frequencies on BAND III. Among those frequencies, 7 are used in the

United Kingdom (current as of March, 2007).

Ensemble, station and service

The number of stations that make up one frequency differ between DAB and analogue

radio. Analogue stations all broadcast on different frequencies, even if it is the same

company doing the broadcasting. With DAB however, it is possible to broadcast a

number of stations on the same frequency.

In DAB terminology, a group of stations on the same frequency is called an ensemble.

As shown in the diagram, an ensemble consists of a group of stations which have

primary services, they can also have secondary services. This means, for example,

that commentary on sports events from different areas can all be broadcast at once.

DAB reception method on this unit

Depending on the region there is a difference between broadcast frequency and

stations broadcast along the same frequency. For this reason, a memory of receivable

stations should ﬁrst be created and then selected from those memorized stations as

the reception method.

DAB Auto Scan

This function searches for currently receivable stations and inputs them into unit

memory.

When DAB is selected for the ﬁrst time, this function starts automatically.

Note

Even if the station is stored into memory, some stations may not broadcast depending

on the time of day etc. If this occurs, “NO SERVICE” is displayed.

Station Memory Updating

When there is a station name change, or a new station begins broadcasting, the unit

memory is automatically updated when:

The previous station name is displayed by selecting “STATION TUNE”.

One of the stations already broadcasting on the same frequency with the new

station is displayed by selecting “STATION TUNE”.

Note

Deleting stations that are no longer broadcasting is not automatic. If you want to

delete a station, perform Auto scan again and the new memory is created.

When a new frequency begins broadcasting, stations on the new frequency are not

automatically added to memory. Perform Auto scan to add them to memory. Also,

you may need to change the Auto scan range if the new frequency is outside the

factory set Auto scan range (➡ page 7).

STATION TUNE

You can select stations from the memory created as shown above in alphanumeric

order. You can easily select your favorite stations by using presets (➡ page 6).

•

DAB outdoor antenna

RQTV0123

Getting started (continued)

Optional antenna connections

FM outdoor antenna AM outdoor antenna DAB outdoor antenna

FM outdoor antenna

(not included)

75 Ω coaxial cable

(not included)

AM loop antenna

(included)

AM outdoor antenna

(not included)

Be sure to fully

tighten the screw.

DAB outdoor antenna

(not included)

• Never use an outdoor antenna during a lightning storm.

• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.

• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally

along a window or other convenient location.

Step 2

- Inserting batteries into the remote control

� Batteries

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period of

time. Store in a cool, dark place.

• Do not use rechargeable type batteries.

• Mishandling of batteries in the remote control can cause electrolyte

leakage, which may cause a ﬁ re.

Do not:

• mix old and new batteries;

• use different types of batteries at the same time;

• heat or expose to ﬂ ame;

• take apart or short-circuit;

• attempt to recharge alkaline or manganese batteries;

• use batteries if their covering has been peeled off.

� Use

Aim at the remote control sensor, avoiding obstacles, at a maximum

range of 7

m directly in front of the unit.

Refer to page 7 for remote control signal sensor position.

Step 3

- DEMO function





When the unit is ﬁ rst plugged in, a demonstration of its functions may be

shown on the display.

If the demo setting is off, you can show a demonstration by selecting

“DEMO ON”.

Press and hold [

7, -DEMO].

The display changes each time the button is held down.

 

While in standby mode, select “DEMO OFF” to reduce power

consumption.

Never use an outdoor antenna during a lightning storm.•

DAB operation

 Press [TUNER/BAND] to enter DAB mode.

The unit comes on.

“SCAN FAILED” appears if no stations are memorized. If this occurs, adjust the

antenna and try Auto scanning or change the Auto scan frequency range (

➡ page 7).

 Press [PLAY MODE] to select “STATION TUNE”.

Each time you press the button:

“STATION TUNE” “PRESET TUNE”

 Press [2/u] or [1/i] to select a station.

The station name changes in alphanumeric order.

Note

If you are selecting DAB for the ﬁrst

time, “DAB Auto Scan...” is displayed,

stations that are currently receivable are

memorized.

When a frequency is tuned the ensemble

corresponding to the frequency is

displayed.

The station ﬁrst in alphanumeric order is

broadcast.

DAB

SC-EN35 DBEB.indd 5 28/03/2007 14:20:12

Technics SCEN35DB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info