1
EN
INTRODUCTION
FOR YOUR OWN SAFETY
OPERA
Keep this manual for future reference.
T
without having read this manual carefully
The manual explains how the various components work and provides instructions
for carrying out the necessary checks and maintenance
operations.
1. SAFETY RULES
! W
the manufacturer may result in a risk of
injury to persons!
Any maintenance operation not described in this manual must only be carried
out by an
! CAUTION ! The following instructions should be carefully followed in order
to reduce the risk of kick-back resulting from
improperly sharpened saw chains.
1 - USERS. The grinder must only be used by adults. Users must be in good physical
condition and familiar with the instructions for
use.
2 - KEEP CHILDREN
3 - WEAR PROPER
or any other jewelry that could come into contact or get caught with the grinding wheel
or any other moving parts. Non slip footwear is recommended.Wear protective hair
covering to contain long hair
4 -
protective eyewear while operating the grinder and while retouching the wheel using
the dressing stone.
eyeglasses only have impact resistant lenses, they are NOT safety glasses.
5 - NEVER STOP
rotation of the grinding wheel with your hands.
6 - DISCONNECT
tting
or transport.
7 - KEEP GUARDS IN PLACE
without the wheel guards in place.
8 - REMOVE
adjusting wrenches are removed from tool before turning it on.
9 - DON’T FORCE
was designed. Each grinder has a plate indicating:
- size of arbor: Ø .866” (22 mm)
- no-load speed in revolutions per minute: RPM 3400
- always to read instruction manual before operating the machine
- always to wear eye and face protection
- always use the proper grinding wheel
Also make sure that the voltage and frequency indicated on the plate applied to the
grinder correspond to those of the mains hook-up.
10 - REDUCE THE RISK OF UNINTENTIONAL
the start-up switch is in the “0” (OFF) position before connecting the plug to the outlet.
1
DEFECTIVE OR NON-ST
12 - REMOVE THE PLUG from the mains immediately if the cable is damaged or
cut; for cable repair or replacement, contact your authorized dealer or service center
The power supply cable is complete with terminals - with protection. The internal
electrical connection consists of inserting the feeding cable terminals directly in the
switch. The electrical connection to the mains shall be made in such a way as to
prevent damages by peoples or vehicles which could endanger both them and you.
13 - KEEP WORK
Make sure that the working area of the grinding wheel is free of tools or other objects
before starting up the grinder
14 - DON’T USE IN DANGEROUS ENVIRONMENT
or wet locations, or expose them to rain. Keep work area well lighted.
15 - CHECK THE POSITION OF
that it remains outside the range of action of the grinding wheel and is not under
tension. Never operate in the vicinity of other electrical cables.
16 - DIRECTION OF FEED. Feed work into a blade or cutter against the direction of
rotation of the blade or cutter only
the grinding wheel has moved entirely outside the work area.
17 - MAKE WORKSHOP KID PROOF with padlocks, master switches. Do not also
allow anybody but the user to remain in the vicinity of the grinder while it is operating
or to touch the grinder supply cable.
18 -
19 - Before starting the grinder
CORRECTL
Do not overtighten the wheel nut.
20 - SECURE WORK. Make sure that the machine is stably secured, as shown in
Figure 1. Use the vise to hold chain. It frees both
hands for moving the wheel down to grind the chain.
21 - DON’T OVERREACH. Keep proper footing and balance at all times.
22 - NEVER ST
injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.
23 -
24 - CHECK DAMAGED P
all the devices, those for safety and others, are in good working order
wheel or other part that is damaged should be carefully checked to determine that it
will operate properly and perform its intented function - check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions
that may affect its operation.
be properly repaired or immediately replaced.
25 - USE RECOMMENDED
recommended accessories. The use of improper accessories may cause risk of injury
to
and consistent operation of your grinder
must only be replaced using ORIGINAL
26 - USE ONL
27 - CHECK YOUR MACHINE. Never work with a damaged, poorly repaired,
incorrectly tted, or
any safety device.
28 - USE RIGHT
other than saw chains. Don’t force tool or attachment to do a job for which it was not
designed. DO NOT USE the machine with saw blade disc assembled.
29 - LEND YOUR GRINDER ONL
operation and correct use, and always give them the instruction manual to read
before they start a job.
30 - MAINT
performance. Follow instructions for lubricating and changing accessories.
31 - STORE
the reach of children.
32 - NEVER LET
33 - NEVER USE THE GRINDER IN
A
34 - T
order
elsewhere. T
35 -
maintenance or repair operation.
36 - NEVER JERK THE CABLE
the cable away from heat, oil, and sharp objects.
37 - USE PROPER EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough to carry
the current you product will draw
resulting in loss of power and overheating. T
depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number
T
Ampere Rating
V T
120 V~ 25 ft. 50 ft. 100 ft. 150 ft.
240 V~ 50 ft. 100 ft. 200 ft. 300 ft.
More Than Not More Than Gauge needed
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
Only the applicable parts of the T
