486520
28
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
52
Troubleshooting (VCR)
“Power On” does not work.
Doesn’t work when Power is on.
A videotape can not be inserted.
On inserting a videotape, the tape
is re-ejected.
A videotape will not eject.
Tuner on video and playback does
not appear.
Noise (screen noise) appears on
screen.
Noise appears on screen after
recording.
While in playback, noise appears.
Sound and picture are irregular.
Sound comes out but picture does
not appear.
Picture is irregular and stripes
appear.
"Screen Error" message is displayed
on screen.
While recording and playing,
waves appear on top of screen.
Screen is not clear.
A screen in PAUSE is trembling or
slow screen is not clear.
Checks
Symptom
Check whether the power plug is inserted in an electric outlet.
Check whether a videotape is inserted.
Try to insert the plug again.
Check whether the power plug is inserted in an electric outlet.
Check whether the videotape is in.
Check whether a videotape is inserted in the right direction (a side of
transparent window should be on the upside)
Try it again after fully ejecting it.
This is a safe mode to protect a videotape when not inserted
correctly. Please pull out the tape and insert it again.
If the product is used for a long time, a videotape may not be ejected
due to the film inside being stretched. In this case, please pull out the
power plug for about 10mins and then press EJECT button.
Please check your antenna’s connection.
TV channel should be fixed on video channel.
Check your antenna’s signal whether it may be weak. In case of
weakness, please use a frequency amplifier connected with the device.
Press TV/VCR and check VCR is displayed in the display panel.
While not using VCR, was it turned on?
While recording a program, did you watch another channel?
Select TV by pressing TV/VCR button on remote control.
While playing a videotape, there may be some noise at the beginning
of a videotape or resuming after PAUSE. This is normal.
Press TRACKING for better reception. Videotape may be poor. Try
to change it to another one.
Please use a head cleaner to clean the VCR heads. VCR heads may
be contaminated - try using a head cleaner.
Since VCR signals are not stable like TV signals, screen may be
unstable or curved while playing. To fix the problem, adjust the
horizontal hold.
In case videotape has been recorded using other products or an old
product, lines may appear on the screen.
Try to adjust the screen by TRACKING+/- buttons
Try to use a head cleaner.
Try to use a head cleaner.
Try to adjust the screen by TRACKING+/- buttons.
53
Troubleshooting (VCR)
Recording a TV program is not
possible.
Once pressing RECORD, a
videotape is ejected automatically.
Remote control doesn’t work.
VISS index search does not work.
Cable broadcasting can not be
selected.
Checks
Symptom
For recording, you should use videotape with a tab.
Check whether a channel is fixed on video. If not, you have to switch
to TV by pressing INPUT button.
Check whether the timer recording infomation is correct.
Are RF cables connected to antenna terminals correctly?
Does the CHANNEL number selected in the display section?
Check that the videotape has a tab or whether the tab is broken. (if it is
broken, try scotch-taping it)
Check whether the screen is displayed in VCR only channel. Press
INPUT button on the remote control to adjust in "General Broadcast"
condition.
Check whether the clock is set correctly.
Does the display on your video show “
(Ready to timer record)?
Please cancel timer function.
Check whether the timer recording information is correct.
Check that the tab on the videotape is not broken. (if it is, try to scotch-
tape it)
Battery may be weak or flat.
Try changing the angle, degree or distance.
Make sure there are no obstructions between video and remote
control.
Are you playing a tape that was not recorded on this VCR?
You may be recording it in REC-PAUSE. Start recording from STOP
mode.
Please CABLE not NETWORK from the CHANNEL SETTING.
The others
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Telefunken TDV7500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info